WarmGlass.com

Thanks Tony. I have now successfully replaced my relay, and yayyyyy!!!!! my kiln is now working again. This solution is directly because of the input from this forum, I thank you all with all of my heart!!!

Hi Arnold, Brad and Tony - I have used my multimeter ( with care ) and determined that no power is getting to my side elements, and made sure power is coming into the kiln ok. Therefore you are correct that it is the relay that needs replacing. I will order one tomorrow, and am confident I can insta...

Thanks Arnold, I have a multimeter. I will open up the kiln electrical again and take a look at everything, see what I can see, test what I can test.

thanks, input re thermocouple very useful, really appreciate being able to get advise,

Thank you for your input Tony and Arnold - I will look into replacing the relay(s), this makes sense to me .

I have an Evenheat Rampmaster II, GTS 23-13. The side elements are not coming on when I fire. The lid element works fine. I just ordered new elements and replaced them, turned kiln on, and grrr, they are still not coming on. I do not understand what is going on, I am stumped, ----anyone with advise ...

I use the nichrome wire in fused glass sculptures. I usually use 17 Ga, and sometimes twist several strands together. I have been doing this for years and it works fine 2 out of 3 times. I just dont understand why sometimes it doesnt work. There must be others who use wire and have experience with t...

I use Nichrome high temp wire inclusions alot in my fusing. Usually it works fine but sometimes I have trouble with a small crack occurring at the tip of the wire. I have tried slow soaks, slow ramp down, longer anneal soak, thicker glass, everything I can think of. I am frustrated, and wonder if ot...