WarmGlass.com

Is this sterling silver like you would use in wire-wrapping?

Thanks for your reply! I will try that! I am new to this, so your suggestion was very helpful. I am glad that someone knew what I was trying to explain. Renee

Hi- I have been firing small pendents using 2 layers + my decorative layer on top. I heat the kiln to 600 and then take it up to 1500. I let it set there for 5 minutes and then turn the kiln off and let the kiln cool to room temp. I have been using the fiber paper for the holes. My problem is the to...

I posted a couple days ago in a panic because I couldn't get my new kiln up to 1500 and finally found out what the problem was! I had the meter in the back of the kiln pushed in too far- therefore metal was touching metal and throwing the whole thing off!! I actually had the kiln up alot higher than...

I finally found out what my problem was! I had the meter in the back of the kiln pushed in too far- therefore metal was touching metal and throwing the whole thing off!! I called MIke at Jen- Ken and he figured it out right away, plus gave me bunches of good tips! AAAA++++ customer service for anyon...

That was my mistake- It was 12 guage wire. I had everything backwards- it's not a peep hole, but a window! Thanks for your patience! Renee

Hi! I guess my newness at this is showing! It is a window- not a peephole. It is on a 20 amp dedicated breaker and 12gaged wire wirh ground was used as specified in the manual. All the elements are glowing red. The intense heat is coming from the window area. Renee

Does anyone have the side peephole in their kiln? I have a new Jen-Ken G-11E. There is intense heat coming from the peep hole area. I can hold my hand about 6 inches away for 15-20 seconds before I have to move it away. Is this normal, or is this possibly why I cannot get my kiln up to 1500? Thank y...

Hi! I have finally fired up my new Jen Ken GS-11E kiln for the first time, but it seems to be taking a really LONG time to reach 1500. I am doing the kiln temp and timing (Nothing in kiln except shelf). It seemed to go along pretty well up to the time I reached the HI switch. From 0 to 600 it took a...

Thanks for the responces! I finally got the web page to work and found out what I needed. Have a great NEW Year!!

Hi! I just got my JenKen kiln (GS-11-E 120v 17 amp) and bought the 20 amp breaker for a dedicated line. My question is, can I use a higher amp breaker instead, so that I can run my shop light and light box off the same outlet without ruining my kiln or overlooading the line or does dedicated MEAN de...

Hi all! Can anyone point me in the right direction to find the jen ken kilns online? I would like to see pictures and prices of the kilns. Their web page doen't seem to show up? Thanks! Renee

Hi everyone! I am new to this and wonder if anyone has tried melting slag glass. I know that it will depend on the thickness etc as far as the timing goes, but has anyone worked with this and can give me some tips? I would like to melt pieces to put on the bottom of windchimes. Thanks much! Renee