Search found 41 matches

by Lyn
Sun Apr 18, 2004 12:07 pm
Forum: Photos and Stuff
Topic: Website debut
Replies: 13
Views: 17292

Congratulations first, I also need a website so I know alot of thought and preperation went into getting it this far! Your work looks very nice. My photos turn out worse tha my scans. #11 was the only problem I'd fix if possible It would be nice to know what size the pendants are, although I am awar...
by Lyn
Wed Mar 31, 2004 12:02 pm
Forum: Techniques and Tools
Topic: Liquitex Acrylic Interference
Replies: 2
Views: 4211

Andrew,
What happens when you try to cap them? Could you paint the lusters on? Were there examples at your site?
That black and white plate is wonderful, a glass saw for intricate cuts?
thanks, Lyn (Born n raised in Minn.)
by Lyn
Tue Mar 23, 2004 2:05 pm
Forum: Techniques and Tools
Topic: system 90 96 compatibility
Replies: 16
Views: 16602

Ontariodon,
It must have been someone at Alpine or in that artical, it was posted as a question. Do we know? Is there anyway to find out?
Lyn
by Lyn
Tue Mar 23, 2004 1:49 pm
Forum: Techniques and Tools
Topic: Layered fused pendant problem
Replies: 8
Views: 9980

I fire in a small aim jewelry kiln and it full fuses in the back and tack fuses in front ( no elements in the door) I have stacked things 4 layers thick and never had things crack apart. For me its crucial where in the kiln things are placed. LOW #4 to 500 20 to 30 min MED. #8 to950 " " &q...
by Lyn
Tue Mar 23, 2004 1:23 pm
Forum: Techniques and Tools
Topic: system 90 96 compatibility
Replies: 16
Views: 16602

Thanks Terry,
I'm being very careful not to mix glass. Heres some pendants I've done. I was just looking around this morning to see if anyone is doing etching on glass. Didn't find any.
http://community.webshots.com/user/lynfeu
Lyn
by Lyn
Thu Mar 11, 2004 11:58 am
Forum: Techniques and Tools
Topic: dichroic pendant progress
Replies: 7
Views: 8190

Tajai, I use an Inland easymark with the tip that came on it. Its small like a big pen and much easier to handle than my Dremal which will work but even with a flex shaft is much harder to control.The Inland is designed for signatures and since mine is years old I've heard I'm lucky it still works. ...
by Lyn
Mon Mar 08, 2004 12:25 pm
Forum: Techniques and Tools
Topic: gold wire for pendants?
Replies: 5
Views: 6662

Cheryl,
I used 20 gauge for the 1 inch round pendants.
I could not get that website to display?
Lyn
by Lyn
Sat Mar 06, 2004 1:31 pm
Forum: Techniques and Tools
Topic: AIM or JENKEN brands?
Replies: 6
Views: 9021

Thankyou Molly,
Yes my pendants were done in the Aim kiln, Mine is most like model 1186 (8" x 9" x 6" inside) John has been very responsive to my questions. his wife does jewlery so I'm sure they answer any questions.
1-800 aim kiln http://www.aimkilns.com
by Lyn
Sat Mar 06, 2004 12:34 pm
Forum: Techniques and Tools
Topic: AIM or JENKEN brands?
Replies: 6
Views: 9021

I have an old very small front loading Aim jewlery kiln and if yours does not have elements in the door expect a difference in firing from the front to the back of the kiln. Mine full fuses in the back and contour fuses along the door. With only a pyrometer I have to keep exacting firing schedules, ...
by Lyn
Sat Mar 06, 2004 11:57 am
Forum: Techniques and Tools
Topic: gold wire for pendants?
Replies: 5
Views: 6417

Thanks Mike, Do the bronze and copper have to be polished after firing? If so can you protect the glass with masking tape or contact paper? I used copper on my first firings and it turned black, at the time I didn't realize my pyrometer was over 100 degrees off so that may have made it worse. Really...
by Lyn
Fri Mar 05, 2004 7:33 am
Forum: Techniques and Tools
Topic: gold wire for pendants?
Replies: 5
Views: 6662

gold wire for pendants?

Some of my dichro pendants would look better with a gold bail. I've tried 14 K gold wire between layers, it held up for the firing (unlike sterling silver wire) but became so black I can't seem to get it clean. A local jewler suggested a higher 22 K gold. Has anyone tried that? Another suggestion wa...
by Lyn
Fri Mar 05, 2004 7:32 am
Forum: Techniques and Tools
Topic: gold wire for pendants?
Replies: 5
Views: 6417

gold wire for pendants?

Some of my dichro pendants would look better with a gold bail. I've tried 14 K gold wire between layers, it held up for the firing (unlike sterling silver wire) but became so black I can't seem to get it clean. A local jewler suggested a higher 22 K gold. Has anyone tried that? Another suggestion wa...
by Lyn
Fri Mar 05, 2004 7:13 am
Forum: Techniques and Tools
Topic: dichroic pendant progress
Replies: 7
Views: 8190

Tyler, The horses and tree are etched by hand into the dichro glass using an engraving tool.
by Lyn
Thu Mar 04, 2004 1:18 am
Forum: Photos and Stuff
Topic: Pendant progress
Replies: 6
Views: 9027

Thank you Gayle,
The images are etched, freehand, with a little engraving tool. Some lines scratched with a fine point.
Lyn
by Lyn
Thu Mar 04, 2004 1:00 am
Forum: Techniques and Tools
Topic: Dichro jewelry problem
Replies: 10
Views: 11124

My first dichroic tree split it looked like a branch so no big deal. The little jewlery kiln I use full fuses in the back and contour fuses in the front. The temp. seem to make alot of difference in the amount distortion. I've got "spots" that are best. Different types of glass crinkle mor...
by Lyn
Thu Mar 04, 2004 12:43 am
Forum: Techniques and Tools
Topic: dichroic pendant progress
Replies: 7
Views: 8190

dichroic pendant progress

New pendants, I'm happy with the silver bails. Some would look better with gold bails. Know of any available?
http://community.webshots.com/user/lynfeu
by Lyn
Tue Mar 02, 2004 3:56 pm
Forum: Photos and Stuff
Topic: Pendant progress
Replies: 6
Views: 9027

It was the m in community, thanks rosanna. Hope you can get there now Amy.
Kitty, plating sounds expensive and I hate to add another step in the process. I have a great book on patinas around here someplace If I could make the silver even look goldish I'd be happy. Thanks for the comments. Lyn
by Lyn
Tue Mar 02, 2004 1:02 pm
Forum: Photos and Stuff
Topic: Pendant progress
Replies: 6
Views: 9027

Pendant progress

On "Pink Rear"I think I finially made a decent fine silver bail. Some of these really need a gold bail, anyone know if there are gold bails available with the leaf on the back. When I tried gold imbeded in the glass it came out very black, any easy way to clean that? Thanks for any comment...
by Lyn
Tue Feb 17, 2004 11:08 am
Forum: Techniques and Tools
Topic: system 90 96 compatibility
Replies: 16
Views: 16602

Gary from Alpine online had a hard time finding it to show me. It was moved from the 1st page on dicro.
by Lyn
Tue Feb 17, 2004 6:57 am
Forum: Techniques and Tools
Topic: system 90 96 compatibility
Replies: 16
Views: 16602

http://www.alpineglass.com/shop/category.php/id/288/

above is the page, with an active "click here" like below

System 96 Frit - COE 96
Why System 96?
Click here to find out.