WarmGlass.com

thankyou
will try

I just bought a cple of new stainless floral former and Hitemp1800
Sprayed them, fired them to 700.
Put glass on when cold, set in kiln with some that I have had for years, the glass on new former stuck and broke, older ones were fine.
Any ideas?
tks

Having never used a ceramic mold, a couple questions: 3 or 4 coats of kiln wash? prefire to ?? how long before needing to kiln wash again do you sand off when needed or can you actually rinse of kiln wash with water? will most glass slump at app 1200 - 1250? one more question, how the heck do you va...

Morning from BC Can I get opinion(s) on the following 12" square of float over a treated bisque form and used the following firing sche in my skutt: 370' ph to 1100 9999' ph to 1325 soak for 14mins ( was fine at this point , that I could see) 9999' ph to 950 150'ph to 750 500' ph to 0000 when I...

Can anyone give me some info on using bisque forms, how many layers of kiln wash, do I refire after spraying with kiln wash before adding glass, can I slump over it or only on the inside, thanks, Archie

afternoon

If I wanted to try a bowl, ect using float glass and I should use 2 layers of glass? can I cap colored float with clear or should I use two layers of the colored? Can anyone give me a suggestion for a firing sched for a Skutt? thanks, Archie

thanks, I will give it a try, archie

evening, I would like to try making a bowl, app 12 - 14" across , out of float glass, Is there a schedule somewhere for float, I'm not having much luck finding one. Does anyone know if the preprogramed scheds that come with the "Skutt GM814" are for float? Would I fuse together at lea...

thanks for the info, archie

morning from Vancouver Isl I have a couple of questions, any suggestions would be appr. I have just fused my first pieces of glass together to later slump into a bowl-2 pieces of 9" circle, bottom slightly smaller with some smaller pieces on top of both for pattern 1. do most people heat the st...

thanks for the info, archie

morning from BC, I tried my first firing yesterday, following the book I did coasters first, the two that I did exactly as the book suggested turned out fine though the edges were a little rough, another I put a 2" square of aluminun foil between layers and it had a couple bubbles that made it ...

morning from BC, I prefired my shelf to 500 and did my first firing, coasters as is suggested, the two I did exactly as the book suggested turned out fine except that the edges were a little ruff, another I put a 2" square of aluminun foil between layers and got a couple of bubbles that made it...

thankyou

morning, hope this isn't coming up twice My husband bought me a Skutt814 for Christmas, I haven't tried it out yet, just got wired yesterday, thought I would practice with coasters but wandered if anyone has ever done wine/beer bottles on their side, thanks for any suggestions and I have learnt lots...