WarmGlass.com

I also saw on Facebook. Printed so many posts from him with glass help, before the internet exploded. May he rest in peace.

Thank you very much Brad and Dick. I'll go ahead and fire it. I appreciate all the info and you taking the time to answer ! The Warm Glass board is still the place to go when you want (accurate) info (IMO) Thank you again !!!

I just received a corelite kiln shelf. Do I need to do anything special before using it ? It didn't come with instructions. I read in older threads to heat up at 200DPH. Does this mean when firing glass that I always need to take the shelf into consideration and ramp whatever project I'm working on,...

Never mind.... relentless searching on my part got me the info I needed. Thanks Brad for this wonderful board that contains everything we need to know !

I know that if the foil touches my kiln shelf, it will contaminate it. If the foil doesn't touch the shelf will I be ok ? Will the fumes from the foil have the ability to contaminate the shelf even if its not touching ? Are the fumes going to contaminate the brick in my kiln (I will vent) What temp ...

Going to try it with my 12 !/2" SS round from Laurie !

Thanks for the replies...its lots of pieces...

I ordered a bowl mold from Bullseye....it was delivered by UPS...broken. The situation has been resolved (Bullseye was AWESOME) before I throw away the mold....is there any use for the broken pieces ? Different sizes of pieces. Just want to make sure I'm not throwing away broken mold pieces that cou...

Just got a Covington WBS new in the box (garage sale..unbelievable !!) ....I remember reading at some point on the boards, that you could remove the back plate so that the belt has some room to move and you're not sanding on flat surface behind the belt.......not sure about the best way to use the s...

Jim, I would be curious if it was 0013 Opaque white. I've used 0013 in some pattern bars, it is SO stiff that when it is fired the other glass around it flattens. It creates a little bit of a dam effect. Not sure this makes sense, but it is so stiff that its really hard to get it to move.

I used BE opaque white in a pattern bar. The glass was cleaned prior to firing. There was no dirt anywhere. The slab came out of the kiln... there were black specks on and "in" the opaque white. (not many...but they are there) I cut the bar and discovered black specks contained "in&qu...

Thanks Brock !
Going to sandblast & FP !

I made a sushi platter from pattern bars. Some of the cuts were thicker than others. Prior to firing the piece it had an uneven surface, it didn't fuse totally flat and has some devit. Would it have been better to increase the temp or increase the hold.(For the flatter surface) ( BE glass 1807-1808-...

Wrong...it IS deserved !

I got your 51 months comment immediately Brock ! When I first started reading the board there were "posters" that I realized right away, knew what they were talking about....one of them being you. I have my very own "Brock Binder" that is filled with information and schedules. Pr...