WarmGlass.com

Randy !
Thanks for the detailed 'how to" your magnet was one of the most amazing! Thanks so much for sharing! So you don't have to put kilnwash on the pot interiors at all huh?

Thanks Cynthia ! I'll try it again!

Hi All, I checked the archives... and found alot about the firing temps for Super Spray - but thought I'd check anyway .. I had 3 ,7" tiles with some devit, and a few flaws, ground off. One 13" plate undergoing it's 3rd firing ( little devit on the center white circle no problems with the ...

Hi Brad,
I signed up quite some time ago but don't have instructions for CC payment.
Please send to my work & home email so I don't miss out - today - if you can! thanks Can I send those off line to you?

Thanks a million Ron! that is a huge help!

Hi there - sorry to bother you guys but I've searched for this in the archives and apparently I'm the only person who has a hard time telling the irid side on clear BE irid glass. When I was at Corning last year it was described as the "side that had a bit of a drag" indicating the metalli...

thanks!

Judy,
Can you tell those of us who may not know who Jim Berry is, where to buy the sterling rings from? I've been searching for the same thing for ages! Many thanks

Well the results are in for the Paragon GLADTSD 24 - it ain't so pretty... The top shelf as you all predicted fared better at producing a full fuse that the lower shelf ... Oddly the red BE glass over clear is the only one of 4, 7" plates on top that didn't come to full fuse. The 2 Black & ...

well the results are in for the Paragon GLADTSD 24 - it ain't so pretty... THe top shelf as you all predicted fared better at producing a full fuse that the lower shelf ... Oddly the red BE glass over clear is the only one of 4, 7" plates on top that didn't come to full fuse. The 2 Black & ...

thanks Dani! that's encouraging - although I should probably done a test on the 2 shelves first - but what the heck -- seem there's just no way to learn without making a few boo boos

Lot's to think about.. Thanks for everybody's ideas.. I certainly hope I don't find a big drippy mess like Geri said! I didn't turn off my top elements - because - duh- I just didn't think of it... I'm not sure 2 shelves is worth it either - but as an experiment and since I don't have alot of days f...

Hi - Can anyone offer advice.. pros & cons of firing with 2 shelves ? I have a Paragon GL24 ADTSD...elements in top,side & doors... and wonder if I should know if this is a bad thing before I lose 2 full shelves of BE glass that is set to be fused for blanks... any help is appreciated. Thanks

so in summary - what should I have done differently - since it was no big curve to begin with ... just refired it and let it flatten ? would it have? and thanks again for the insight...

oh yes,,, and it was directly on the shelf - bad idea?

I know ! ridiculous.... yes it has holes.. 2, they are at opposite points on a circle about 3 1/2 " away from dead center -AND in the rim vertical face. I checked them and poked my little bamboo stick in both of them and didn't have to kiln wash it the 2nd time - so little chance of debris gett...

http://img.villagephotos.com/p/2003-11/ ... bubble.JPG

sorry - i think i've got it now....

[img]<img%20src="http://img.villagephotos.com/p/2003-11/ ... t=680>[img][/img]

Well - here it is - my huge bubble - thanks again to everybody !
I'll be interested to see if any of the diagnosis change after you've seen the patient...