WarmGlass.com

since it requires certification in order to simply sell the stuff, i wonder if this is tied into a mlm lawsuit avoidance idea? It does not require certification to sell it. Certification qualifies you for deep discounts without the large quantity requirement. At least that is the case with Rio Gran...

Robyn, please don't take this personally, I don't know you and have no opinion of your work or teaching skills. What I want to know is, does anyone ever fail the PMC certification course? Is it a rubber stamp, you take the course, you're a certified teacher? Is there a tough exam? The reason I ask,...

I took a class last fall from Robyn Alexander in Berkeley to learn about working with PMC. It's so easy to use and is an excellent medium to combine with fused glass. I was able to make 4 silver pendants with glass cabachons from just one small package of PMC. You can also use PMC for making unique...

I've been asked to make 1/2"-3/4" thick flat paperweights in the profile of two different dog breeds. I'm thinking about frit casting using 1" Kaiser-Lee fiber board, cutting out the shapes while leaving at least 1" around all edges. It woud look like a thick dog-shaped drop ring...

CR Loo carries it as well.
http://www.crloo.com

The screens referred to in the original post are PhotoEZ (tm). The standard is 100 mesh, with their high-res being 200 mesh. The screens come already coated, so there is no fooling around with emulsifier solution. Once developed, the finished screens are easily reused after rinsing well with water a...

Much as I want to see it, I eventually get an error....
"The File You Are Looking For Is Inaccessible"

Water miscable mediums will work as will squeegee oil. Squeegee oil stinks, but it is a better medium for screening. The water friendly mediums tend to get air bubbles when screened several times. A search of the CR Loo pdf catalog did not find squeegee. When I called Leslie Ceramics, the guy on th...

Any suggestions for a cheap airbrush to use with mica? I'd rather not invest in the highly recommended Aztec and compressor unless I'm certain it's something I'll use more often. When mixing mica and klyr-fire, is there a particular consistency I should look for? While I'm here.... Can the mica-klyr...

Titanium Dioxide it is !!

You can read the MSDS for LIquid Paper at:

http://www.sanfordcorp.com/sanford/pdfs ... 0Fluid.pdf

I must be really bored.....

Dee - I need something at last a couple of feet long. Three feet might be best. Camaro - do you mean flexible tubing?The shipping tubes might work, I just wish the were longer and narrower.... Steve Tap Plastics sells plastic tubes 36" long. You can see them at: http://www.tapplastics.com/shop...

Marty wrote:Barbara Galazzo won for flat glass (congratulations!) but who got the fused?

Can someone explain to me the difference between flat glass and fused glass?

An email update was received 11/24 @ 8:19am ... NEWS FROM STAINED GLASS WAREHOUSE ****TO UNSUBSCRIBE, FOLLOW THE DIRECTIONS AT THE BOTTOM***** More news from Stained Glass Warehouse.............. Web Site online again ----- well sort of. TEMPORARY WEB ADDRESS http://www.allstainedglass.com. Please &...

A source for bronze,brass or copper powder is Montoya Sculpure and Fine Art Supply in Florida. I think a 1 pound can of copper powder is about $15.00 I can't find web site right now, but you can call 1-800-682-TOOL(8665) to place an order or request a catalog. Judi http://www.montoyasculpture.com/

Choosing a webhost is the least of your worries -- and one of the last things you should do. Designing your own website can be an adventure but if you don't understand what you are doing, it will end up hurting you far more than helping you. A poorly crafted site will detract from your work. Conside...

Thanks to Brock, Steve & Kitty for their suggestions. Now, I just have to find the time in the studio!


Robyn

I sandblast mainly, and use a Dremel for touch-ups and some detail work. 4 mil vinyl is plenty for the light sandblasting needed to remove irid. Brock Brock &/or Steve -- If using the Dremel for detail work such as seen in Steve's pendants, what type(s) of cutters, burs, wheels, stones or combi...

Nope! Etching cream won't work. Sandblast or Dremel. Brock What tool bit you using with the dremel to actually grind/blast off the irid? I use a flexshaft daily in the studio on my jewelry with a variety of brushes, burs, grinders and what-have-you. I've yet to use it with glass, so need to know wh...

have you tried out tony's sign? .... ...it kinda seems to help develop a rapport with people. i made them laugh, i laughed along with them...really a nice ice breaker. i'm a big advocate of the sign. huge. i've mentioned it before. i'll mention it again too! hehe. For those of us in the dark, what ...

.... also, someone gave me a referral for a company that cuts the vinyl from your own artwork, if you dont want to buy the equipment. that would give you a way to try this out before spending $500. Would you willing to share the referral info? I too found the under $500 price intriguing, but would ...