WarmGlass.com

That´s not fair
At least it is linear???? If I test one I can apply for any areas????
Please, say YES
Luiza

Well, I won´t really fuse it, but I want to texturize it with some forms done from fiber paper, and I´ve done lots of tests and I found that it has to stay 10 min soak at 1470 F, to be perfect.
Thanks
Luiza

Hi
I have to fuse one layer of glass - 3mm. I know that there will be some shrinkage. I want that the final piece to be 8.3X7.5 in. Is there any formula that I can use to calculate the size of the original glass? Is it linear, or the shrinkade depends upon the area?
Thanks
Luiza

Has anyone tried any of the Craft Oven Cured Glass Paints on finished pieces of their own glass works? My glassware is for decorative purposes only. Thanks to all that respond. :D I use this kind of paints for my jewelry pieces. You can´t use them if they will be used with something hot, like asht...

Luiza I fuse 2 layers of 10mm all the time. Only once did I try a dam and it killed me. The glass hit the dam and curled up then shrunk back and became too small. I often make the top piece larger than the bottom by it's thickness which makes a rolled edge. The edge is especially good on the circle...

Hi
I´m having problems to full fuse two layers of 3/8 in float glass. I know I have to do some kind of dam, but I can´t figure how.
I need to fuse two square layers 18x18 in, and two circular ones, 16 in diameter .
Thanks for any advice
Luiza

Hi everyone I´just beginning a new project - very good money - that is a lot of sinks... I read all that I could find in the archives, but still have lots of doubts. Barbara Cashman is helping me , but I have some questions that I´m sure some of you can help me. The person that asked me for the si...

Hi Israel
Couldn´t find the sink among the pictures on the site.
Luiza

Hi Bex I have made a wonderfull fountain for my bedroom. Not too big, but give us that delicious water sound and happy dreams... It´s really easy, all you need is an aquarium pump (you have to decide the height of your fountain, and someone at the store will help you with the right pump - you won´...

I read all I could find about casting/draping/encasing rocks and wasn't happy with any of it. So I've put together a process that works well and answered the question; YES, you can cast/drape/encase rocks. Pictures available via email; I haven't figured out how to post one on this board yet. Jerry ...

Well Janus, as I can´t afford imported Spectrum glass, that is the only "art glass" we have here in Brazil, I work with float all time. We don´t have colored float also, so I have to paint the float. That is all I can do, and I can assure you that I have lots of fun with not so much money... Of co...

Luiza, I'm sure that in Brazil there are many tile shoppes and tile installers. Go visit one of them and ask about their saws. I'm sure you will find that they have a saw similar to what I posted earlier. Take a look at http://www.felkersaws.com/new_TM75.shtml Felker is a manufacturer of tile saws ...

Thanks Pam, I was feelig myself a complete incompetent fool
Now I fell a little better
Luiza

Hi Tony I can´t believe you found this!!! I will call them tomorrow and see if they have it here. Sometimes, even though there is a local vendor, the machines are quite diferent. I talked to some persons that use tile saws, but all use the hand held type. Thanks vert, very much for your time and pa...

Do you mean Zircon instead of Kaolin ? Just Zircon and water?
Are the results smooth?
Luiza

Hi Tony
I searched a lot, but I could only find the hand-held type. Maybe it´s possible adapt a kind of suport. What do you think? Please, be patience, I´m very ansious about this

Thanks Charlie
As I use float, I imagine that I must use 1700 .
I cant´t wait to try. Need more kilns, so many new options...

Can someone be so kind to give me some directions to learn about this Hi fire technique? I´ve never heard of it. Any link? Any book?
Thanks
Luiza

Hi
Are there any chances of makimg kiln casting from a pot melt, with float glass, without devit? Can I add Borax to the pot?
Thanks
Luiza

Hi Tony
The site I could find that shows a similar one is
http://www.dewalt.com.br/products/Cata/ ... dID=DW861B
The saws I found here are for granite and other stones cut. It´s not ok?
Thanks a lot for your patience.
Luiza