WarmGlass.com

Hi Terry, It's nice seeing you on this board. I use a pocket purifier which sells in the $25.00 range. Glass suppliers have a different one they sell for around $75.00, My little purifier does the same thing. Here is a link to amazon: http://www.amazon.com/Pocket-Purifier-Handheld-Ultraviolet-Germ-E...

Hi Brad, Your pictures wont open for me.
Bob

Les, very nice piece, Will Havi get a commission.
Bob

Thanks for the file Al. What a great tool.
Bob

That did not take long, enjoy the new toy.
Bob

Hi al, I will pm you also, I would be very interested.
Bob

Very nice necklace.
Bob

I also use them all the time. I have 2 I have been using for over 5 years, their still going strong.
Bob

Hair spray works well, in some cases I use a hot glue gun.
Bob

Geo, I never cover the decal it sits on top of the glass. You lose color intensity when you put a clear cap on it. Make sure your printer is set to the highest resolution. I let the decals dry at least over night, longer if possible. I work with system 96 glass, I go to 1380 and hold 20, kilns will ...

I use the cartridge that comes with the p1006 hp not the micr.
Here is an example:
Bob

Good luck with the project Paul, will we be able to check it out at the time of installation.
Bob

If there are no side elements I would go ahead, don't go any higher than you have too.
Bob

Real (old fashioned) baby Diapers are far and away the best. The ones that Gerber sells through Walmart etc work fine, but the really old ones (like when I was a baby) are the best. If you look at what the guys who sell glass blanks to the award industry sell, you will see that they are Gerber baby...

I have the Tauras 3, good tool.
Bob

If that's your first piece your off to a great start. Looking forward to seeing your next one.
Bob

Very nice Tim, That most have taken some time to cut and lay out.
Happy New Year to you:
Bob

At this point in my life, you'd think I would have internalized this lesson: Whatever seems too good to be true usually is. On the flip side, I figure if I'm batting 1.000, I'm not pushing the envelope far enough. So some experiments just need to be run...and as long as I'm willing to accept some r...

Thanks Cynthia, that may be the way to go. I will try making some chards on my torch that way I could throw a little white in it for an effect.
Happy New Year:
Bob

Thanks Guy, I was up on their site and that is what I thought also, it does look like an opal. After thinking about it I will blow some black shards and use them over a clear, this way I will get the black I want and be able to control the transparency.