WarmGlass.com

Velvet Etching Cream

McKay International
880 Pacific St
Brooklyn N.Y. 11238

My bottle may be as old as 15 years so I hope the info is accurate.

Jack

Sit down with an accountant for a half hour or so. I did last year and I'm glad I made the move.

Jack

Paul,

Go to a local machine shop to have the plate made. Cast iron is great. Should be a few hundred.



Ron,

How thick is that bowl?



Jack

Perhaps the jewelry you are refering to has been flameworked.

Jack

It's actually not a Microsoft issue this time. A corporation in Utah owns the rights to the Unix operating system and is claiming either copyright or patent infringement against the folks that make Linux. Tony[/quote] You are correct. They did mention Unix and Linux. Not sure where I got the MS part...

I don't see the other thread so I'll reply here. I got one this morning from rogers.com but didn't open it. Updated my virus files and three have come in since. saltspring.com studio@crystallo.com and one from NW Artglass. Turns out the target is a Utah Corporation that is involved in a lawsuit with...

Jack- Jenny is a friend of mine, in my town, recently involved in this very quest (but I'm not sure what the outcome was). Alyssa, who started this thread, works with me and has met Jenny but doesn't remember doing so. Clear? Now Alyssa's friend, Kelly (not Kelly Alge), whose first husband's mom......

Jackie Beckman wrote:

Jack Bowman wrote:Who is Jenny David and can she help me if I live in Utah?

Jack

I'm sorry Jack - no one can help you if you live in Utah

Sad, but true. Maybe a change is coming soon.

Jack

Who is Jenny David and can she help me if I live in Utah?

Jack

Hi Denise, We appear to be neighbors. ;) I just started doing some art festivals here in town and have a white EZ UP tent. It's ok but nothing special. In my first show some of the other artists said they're known as "EZ UP, EZ BLOW AWAY". Ha ha. They told me some really good tents were t...

Tony,

Are you recirculating your cooling water? How about the other folks out there using laps. Will recirculated cooling water work? Seems to me if it does it might produce a problem at the polishing stage.

Jack

Amy, All machinery wears out. It's just a matter of time but I think the Fellisati wears out too soon. I also bought one last March and probably used it for 10 hours. I noticed grease oozing into the motor area from the gear head. I took the gear head apart and found it full of water. A bad seal in ...

judith wrote:I have been told that the Higuchis will be teaching at Corning June 20-Jul 3, 2004. You might give The Studio at Corning a call to confirm.

judith

Acording to the catalog I received today from The Studio, You are correct.

jack

I usually cut my bars to full thickness and check at top temperature to make sure all seams have blended together.

Jack

luvhug wrote:How, nice. I always say, sooner or later everyone comes to Florida.
Bobbie

Good thing you don't have mountains, they'd never leave.

Jack

Phil,

How did this project turn out?

Jack

If you want to use two seperate thermocouples you can get a plug setup from an instrumentation shop. That way you will have one tc lead coming from the controller that will plug into the tc of the kiln you are using. The plugs must match the type of tc you are using, most likely K type. Here's a pic...

You would start by tellong us the voltage and amperage requirements for each kiln.

Jack

Jerry, Brad, and Cynthia, thank you for the replies. I'll lean toward the experience and check out Crafts Report and Cynthia's free copy of PGQ. Cynthia, It's been a while. Have you had a chance to see the show at Red Butte Garden? It ends Sunday. My first show so I was quite excited. I'll give you ...

Along the lines of this topic... I've heard of a publication, Profitable Glass Quarterly. Has anybody seen this? Do you feel it is worthwhile for warm glass?

Jack