Search found 260 matches
- Wed Oct 01, 2003 10:18 am
- Forum: Kiln Casting
- Topic: Mixing with the Best II
- Replies: 9
- Views: 10102
The author owns the copyright unless he has given or sold it to the publisher. Regarding the halt in publication of the cd, the question may be whether the artists feel like they own their techniques and whether they agreed to let them be published. So the copyrights may be cloudy on a couple of lev...
- Mon Sep 29, 2003 11:58 am
- Forum: Kiln Casting
- Topic: Hydroperm question
- Replies: 12
- Views: 15890
- Sun Sep 28, 2003 6:40 pm
- Forum: Kiln Casting
- Topic: Hydroperm question
- Replies: 12
- Views: 15890
I don't think many people here use hydroperm. The best thing I can say is you should look at Kervin and Fenton's book on casting to get their recommendations on mixing. They write a bit about hydroperm. I don't think you should need to go to 1400 though. I would go very slowly from 1000 to about 125...
- Sun Sep 28, 2003 6:15 pm
- Forum: Techniques and Tools
- Topic: Drop ring question
- Replies: 5
- Views: 5038
I can't tell if the rim is uneven or the bowl. But in any case, it can be inconsistencies in the glass, uneven heating in your kiln, not exactly level mold, not exactly centered placement of the glass, etc., etc. One thing that often happens with drops is that the center slumps before the rim since ...
- Sun Sep 28, 2003 5:50 pm
- Forum: Techniques and Tools
- Topic: using fiber paper to control the flow of a fuse
- Replies: 3
- Views: 4501
- Fri Sep 26, 2003 3:52 pm
- Forum: Kiln Casting
- Topic: Surface Finishes
- Replies: 18
- Views: 21726
Give us the name of the artist and/or a web site where we can see some pictures. Then we can probably answer your question. In general though -- any technique is legitimate for sculpture as long as it serves the purpose, won't self destruct (unless it is supposed to), and is well executed. A lot of ...
- Mon Sep 22, 2003 3:28 pm
- Forum: Kiln Casting
- Topic: Frax paper/ dams
- Replies: 4
- Views: 6497
- Mon Sep 22, 2003 3:17 pm
- Forum: Techniques and Tools
- Topic: Permanent nose butter and check fixing
- Replies: 8
- Views: 8139
I'm less concerned about yellowing than I am about the epoxy going opaque. It is so thin that I don't think it would be noticeable if it yellowed. Plus, most of my glass is colored anyway. I think using a mix that is formulated for glass repair makes sense. According to John, the longer the curing t...
- Sun Sep 21, 2003 5:11 pm
- Forum: Techniques and Tools
- Topic: Permanent nose butter and check fixing
- Replies: 8
- Views: 8139
Permanent nose butter and check fixing
Nose butter is the stuff you put on sandblasted surfaces to shine them up a little and protect them from finger prints. A lot of people use ArmourAll or stone sealant for this, but they both eventually evaporate off. John Lewis, who does A LOT of glueing, taught us in a Pilchuck class, that you can ...
- Thu Sep 11, 2003 3:53 pm
- Forum: Business Topics
- Topic: gallery insurance question
- Replies: 22
- Views: 25221
The laws that protect people when other people are in possession of their property are sometimes called fiduciary laws. Fiduciary means -- involving a confidence or trust; held or holding in trust for another. That describes exactly the situation of consignment. The gallery is holding your work, (wh...
- Thu Sep 11, 2003 12:31 pm
- Forum: Kiln Casting
- Topic: Mold Mix 6 From Planet Zircar
- Replies: 6
- Views: 9633
- Thu Sep 11, 2003 12:21 pm
- Forum: Kiln Casting
- Topic: Mixing it with the best...any clues
- Replies: 41
- Views: 45526
Give me 48 hours to lookat what I am getting into here and I'll get back to you guys. 7:52pm EST Wed Sept 10 j. Jerry, Lachezar has the cd but hadn't gotten his new, (used) computer running yet. So he asked a friend to print out only the most important information. That amounted to 200 pages. Maybe...
- Sat Sep 06, 2003 12:40 pm
- Forum: Kiln Casting
- Topic: R&R 910 Open Face Cast - Mold Cracking
- Replies: 4
- Views: 7455
Re: More Info
A little more info...its a small open face mold...the piece measure about 3 x 2 x .5 inches. With about 1.5 inches of mold thickness all around, top and bottom. Hope that helps a little more. Thanks again, Russ This size piece of glass doesn't need 1.5 inches of mold around it. You could probbably ...
- Sun Jul 20, 2003 1:25 pm
- Forum: Techniques and Tools
- Topic: Sodium Silicate to seal fiber board
- Replies: 7
- Views: 7751
- Thu Jul 17, 2003 10:54 pm
- Forum: Techniques and Tools
- Topic: Hoist with track needed
- Replies: 40
- Views: 44754
Charlie, I don't understand how rolling the entire lid/hoist assembly would work. Do you have a photo or a link to a place that would help? I have a CM chain hoist. http://www.aceindustries.com/091CMHandCha.htm It hangs from a CM trolley. http://www.aceindustries.com/141CM632Trolley.htm A four chai...
- Wed Jul 16, 2003 1:59 pm
- Forum: Techniques and Tools
- Topic: Hoist with track needed
- Replies: 40
- Views: 44754
I have a bell and two bases. One base is a table, the other is a nine inch deep kiln with wall elements. I use a manual chain hoist hanging from a trolley that rides on a 4 inch I beam. To hang the I beam I just welded plates across the top to line up with the joists with a hole in each side for bol...
- Wed Jul 16, 2003 1:31 pm
- Forum: Kiln Casting
- Topic: release agent for between plaster
- Replies: 7
- Views: 10714
- Wed Jul 16, 2003 1:26 pm
- Forum: Kiln Casting
- Topic: Pâte de verre casts
- Replies: 2
- Views: 4807
There are different grades of plaster, some stronger than others. The stronger plasters here are called gypsum cements. Perhaps you could find some of those. There are also castable refractories, which are stronger and more heat resistant still, but they may be too hard for easy removal from the fin...
- Mon Jul 14, 2003 6:42 pm
- Forum: Techniques and Tools
- Topic: Architectural and site-specific kilnformed glass
- Replies: 9
- Views: 9395
This week I'll complete a baptismal font (a big bowl) that was designed by an architect for a specific site in a church. And I do a lot of light fixtures. I don't think that really qualifies me as the type of specialist you're asking about though. I took Warren Langley's class at Pilchuck earlier th...
- Tue Jul 08, 2003 12:37 pm
- Forum: Kiln Casting
- Topic: Why Plaster Molds Crack
- Replies: 11
- Views: 20520
Ted Sawyer recently talked to a class I was in about water burning out of molds. He put a thermocouple into the center of the plaster of a mold and recorded the temperatures of both that thermocouple and the kiln interior. He soaked the kiln at about 225 F (I don't have my notes in front of me.) The...