using air brush for devit spray, etc...

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Kevin Midgley
Posts: 773
Joined: Mon Mar 10, 2003 11:36 am
Location: Tofino, British Columbia, Canada

Re: using air brush for devit spray, etc...

Post by Kevin Midgley »

Air Brushing anything causes microscopic particles to float in the air in your studio for HOURS afterwards and they will coat everything in your studio as they eventually settle out of the air. Use an extractor booth and a respirator if you value your health.
Top
Post Reply

Return to “Techniques and Tools”