jewelry bit - WarmGlass.com

jewelry bit

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Tony Smith, Brad Walker

Post Reply
Luiza
Posts: 81
Joined: Sun Mar 09, 2003 4:50 pm
Location: Rio de Janeiro / Brazil

jewelry bit

Postby Luiza » Tue Nov 25, 2003 10:24 pm

Hi
I have a glastar diamond grinder, and I want to buy a jewelry bit. The glastar is 42 dolars, and the mica 29. Is there a big diference in quality?
Thanks
Luiza

Susan Moore
Posts: 96
Joined: Mon Oct 06, 2003 10:07 pm
Location: Austin, TX
Contact:

Postby Susan Moore » Tue Nov 25, 2003 11:44 pm

I use the Mika and it seems fine to me. I haven't tried the Glastar bit but Jim at Blue Moon here in Austin told me they are basically the same. The Mika is made in Germany and I don't think I've ever been dissatisfied with German-made tools.

Susan

paulajane

Postby paulajane » Wed Nov 26, 2003 10:30 am

You can get the Glastar for less at AAProducts. http://www.aaproducts.com

Paula

Luiza
Posts: 81
Joined: Sun Mar 09, 2003 4:50 pm
Location: Rio de Janeiro / Brazil

Postby Luiza » Wed Nov 26, 2003 6:07 pm

Thanks Susan and Paula.
As the glastar price was almost the same as mika, I bought the glastar at aaproducts.
Warm hug
Luiza


Post Reply

Return to “Techniques and Tools”

Who is online

Users browsing this forum: No registered users and 60 guests

Warm Glass

2575 Old Glory Road, Suite 700
Suite 700
Clemmons, NC 27012
Phone: (336) 712 8003
Email: wg@warmglass.com