fuseworks microwave kiln decals - WarmGlass.com

fuseworks microwave kiln decals

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Tony Smith, Brad Walker

Post Reply
Jo-AnneMaire
Posts: 5
Joined: Fri May 09, 2014 10:39 pm

fuseworks microwave kiln decals

Postby Jo-AnneMaire » Tue Nov 25, 2014 4:11 am

Does anyone have experience with the Fuseworks decals for microwave kilns? I don't have a microwave kiln but I was given these decals last Christmas. Does anyone know whether they will fire properly in a normal glass kiln? If so, should I use a high fire or low fire program? I only have a few so I don't want to do too many tests (call me lazy but I thought I would go to the experts first). Thanks in advance for your help.

rosanna gusler
Posts: 730
Joined: Mon Mar 10, 2003 2:22 pm
Location: wanchese north carolina
Contact:

Re: fuseworks microwave kiln decals

Postby rosanna gusler » Tue Nov 25, 2014 1:08 pm

Add Colorful Images to Glass
For the price of paper stickers, you can add permanent, colorful detail to your fused designs. Use expressive high-fire decals to make incredible glass art. It's easy! Simply remove decal from backing, apply to the glass and fire to permanently fuse designs onto glass surface. Fuse Art Decals cannot be torn, scuffed, wrinkled or soaked off the glass surface once fired. Lead-free. Decal sheet measures 2-3/8" x 7".

High fire decals cure between 1350° - 1445° F........ i would think that heat is heat and fire to whatever amount of heatwork i needed for whatever i was making. r.
artist, owner of wanchese art studio, marine finisher

Jo-AnneMaire
Posts: 5
Joined: Fri May 09, 2014 10:39 pm

Re: fuseworks microwave kiln decals

Postby Jo-AnneMaire » Tue Nov 25, 2014 9:35 pm

Thanks Rosanna. So, can I assume the Fuseworks decals are high fire decals (as opposed to low fire decals)?

rosanna gusler
Posts: 730
Joined: Mon Mar 10, 2003 2:22 pm
Location: wanchese north carolina
Contact:

Re: fuseworks microwave kiln decals

Postby rosanna gusler » Wed Nov 26, 2014 6:21 am

I would think so. Make one of whatever and see. R.
artist, owner of wanchese art studio, marine finisher


Post Reply

Return to “Techniques and Tools”

Who is online

Users browsing this forum: No registered users and 48 guests

Warm Glass

2575 Old Glory Road, Suite 700
Suite 700
Clemmons, NC 27012
Phone: (336) 712 8003
Email: wg@warmglass.com