Lesson Learned - Major Devit

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
grammy
Posts: 26
Joined: Fri Nov 17, 2006 10:07 am
Location: Charlotte NC
Contact:

Lesson Learned - Major Devit

Post by grammy »

I was in a hurry to make some discs for garden stakes. So I put a 10" one on a shelf and then decided to put a shelf above it with a 12" disc. Well, there was very ventilation for the bottom glass so I got major devit. Lesson learned. Now to get that stuff off. Since I do not have a sand blaster, I will probably hand grind it. Oh well. :twisted: :twisted: :twisted: :twisted:
Post Reply