I'm looking for info - WarmGlass.com

I'm looking for info

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Tony Smith, Brad Walker

Post Reply
Joe Wokovich
Posts: 32
Joined: Tue Sep 25, 2007 1:57 pm
Location: Florissant, MO (@ St. Louis, MO)

I'm looking for info

Postby Joe Wokovich » Sun May 01, 2016 11:58 pm

I swore I’d never do bottles again, but I have an order for 15 cases of wine bottles to slump and shape.
I didn’t like doing these things because of the time and mess of removing labels. I thought I remembered a post or tip sheet I read that talked about a solution that was applied with
a brush, you let it set and the label adhesive dissolved and you scooped the junk off and cleaned the bottles.
Anyone have an idea what this goop is? ( a senior moment, could this be wall paper stripper?)

Thanks, Joe
“If you tell me, I will forget.
If you show me, I will remember.
If you let me do it, I will understand."

And then tomorrow I can start all over again

linn keller
Posts: 52
Joined: Mon Mar 10, 2003 12:22 pm
Location: south tx

Re: I'm looking for info

Postby linn keller » Mon May 02, 2016 8:26 am

joe,
i've used wd40 to remove labels from lots of things, although not necessarily for fusing bottles. i soak in water first to soften and remove the "easy part" and then squirt the wd40 on the adhesive and whatever doesn't want to come off easily. after a short time the adhesive, etc., can easily be wiped off with paper towel.
someone may have what you remember and it may be an easier way. must admit, 15 cases....that's a lot of labels. good luck!
linn
linn in deep deep south texas

Valerie Adams
Posts: 587
Joined: Mon Apr 19, 2004 2:49 pm
Location: Santa Rosa, California
Contact:

Re: I'm looking for info

Postby Valerie Adams » Sat May 07, 2016 8:24 pm


Andrea R
Posts: 61
Joined: Fri Sep 30, 2005 10:52 am
Location: Canada

Re: I'm looking for info

Postby Andrea R » Wed May 11, 2016 11:15 am

I need this info to !!
Cheers,
Andrea
Image
"C'est Moi (Its Me)"

Tom Fuhrman
Posts: 176
Joined: Mon Mar 10, 2003 11:44 am
Location: eastern Tennessee
Contact:

Re: I'm looking for info

Postby Tom Fuhrman » Wed May 11, 2016 10:06 pm

you can' buy blank bottles, no labels from several bottle suppliers. Some years ago, I had an order of cutting off the tops of 1500 1.75L bottles and purchased blank bottles and then had them decorated with the customer's logo. It might be worth it to save the time and mess.


Post Reply

Return to “Techniques and Tools”

Who is online

Users browsing this forum: No registered users and 24 guests

Warm Glass

2575 Old Glory Road, Suite 700
Suite 700
Clemmons, NC 27012
Phone: (336) 712 8003
Email: wg@warmglass.com