New Video

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
aliceRI
Posts: 39
Joined: Wed Aug 03, 2005 8:53 pm
Location: East Greenwich, RI
Contact:

New Video

Post by aliceRI »

Hi all,
Please take a look at this new video of mine.
I'm not sure if its in the correct category but here it is.
https://youtu.be/16BfT31JLXo
Kevin Midgley
Posts: 773
Joined: Mon Mar 10, 2003 11:36 am
Location: Tofino, British Columbia, Canada

Re: New Video

Post by Kevin Midgley »

Nice but lost with all the other videos you can watch on Youtube.
DonMcClennen
Posts: 381
Joined: Sun Mar 09, 2003 9:09 pm
Location: Ontario

Re: New Video

Post by DonMcClennen »

Nice work.. well done! =D>
"The Glassman"
Mark Wright
Posts: 49
Joined: Mon Dec 13, 2010 12:43 pm
Location: Raleigh, NC

Re: New Video

Post by Mark Wright »

Very well done!
Havi
Posts: 619
Joined: Wed Jul 02, 2003 6:01 am
Location: Israel
Contact:

Re: New Video

Post by Havi »

Yes, very well done, both the process and the finished pieces.
Good for you!


Havi
Haviva Z
- - - - with a smile :)

"Speed comes from the Devil" - (an Arabic proverb)
Image
http://www.havivaz.com
Lori Schinelli
Posts: 19
Joined: Sun Nov 20, 2005 8:25 am
Location: Atlanta, Georgia

Re: New Video

Post by Lori Schinelli »

Love the video, Alice!
JestersBaubles
Posts: 705
Joined: Fri Feb 25, 2011 12:01 am
Location: North Logan, UT
Contact:

Re: New Video

Post by JestersBaubles »

Kevin Midgley wrote:Nice but lost with all the other videos you can watch on Youtube.
I think the value of videos like this is not that they are available on YouTube itself, but the fact that they are on YouTube they are accessible via a common link from other avenues. For instance... post a link to the video on FaceBook/Twitter/etc, embed the YouTube video into your web site, put the link on your rack cards, etc. The end goal is not to be *found* on YouTube, but to provide a medium for distribution.

2 cents :)

Dana W.
Kevin Midgley
Posts: 773
Joined: Mon Mar 10, 2003 11:36 am
Location: Tofino, British Columbia, Canada

Re: New Video

Post by Kevin Midgley »

The trouble with sending a potential customer to youtube is that at the end of your video up pops a myriad of other competing artists to whom, with a simple click, they visit and forget about your video, your existence and their possible momentary desire to seek out and purchase whatever it is you have just presented to them.
Post Reply