Copper foil supplier

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Tony Smith, Brad Walker

Post Reply
jim burchett
Posts: 254
Joined: Sun Jun 29, 2003 4:24 pm
Location: Lenoir, NC

Copper foil supplier

Post by jim burchett »

I am looking for a supplier of 1mil or 1.4mil copper foil sheets or rolls. Does anyone know of one? all i can find at Hobby Lobby and Michaels is 40ga or more too thick for the silhouette
"No, you cant scare Me, I'm sticking to the UNION. I'm stickin to the UNION till the day I die" Woody Guthrie
Brad Walker
Site Admin
Posts: 1489
Joined: Fri Mar 07, 2003 9:33 pm
Location: North Carolina, USA
Contact:

Re: Copper foil supplier

Post by Brad Walker »

Bullseye's foil is 25.4 micron, which equals 1 mil.
Kevin Midgley
Posts: 773
Joined: Mon Mar 10, 2003 11:36 am
Location: Tofino, British Columbia, Canada

Re: Copper foil supplier

Post by Kevin Midgley »

beware of the danger of slashing your hand to shreds should a roll of thin metal uncoil. You are looking for something called 'shim stock'.
Marty
Posts: 859
Joined: Mon Mar 10, 2003 3:58 pm
Location: Maine
Contact:

Re: Copper foil supplier

Post by Marty »

Edcosupply.com?
Tony Smith
Posts: 1037
Joined: Sun Mar 09, 2003 5:59 pm
Location: Massachusetts, USA
Contact:

Re: Copper foil supplier

Post by Tony Smith »

Try Online Metals at http://www.onlinemetals.com.
I've used them before and they have excellent service.

Tony
The tightrope between being strange and being creative is too narrow to walk without occasionally landing on both sides..." Scott Berkun
Tod
Posts: 36
Joined: Tue Feb 14, 2006 5:47 pm
Location: Massachusetts

Re: Copper foil supplier

Post by Tod »

I've had good luck with On Line Metals, too.
please visit Beall Glass Studio on Face Book
Kevin Midgley
Posts: 773
Joined: Mon Mar 10, 2003 11:36 am
Location: Tofino, British Columbia, Canada

Re: Copper foil supplier

Post by Kevin Midgley »

That online metals site is 3 times as much as a Canadian supplier of the same metals I was looking at. :shock:
However it was not the copper being searched for.
Google shim stock
Tod
Posts: 36
Joined: Tue Feb 14, 2006 5:47 pm
Location: Massachusetts

Re: Copper foil supplier

Post by Tod »

Admiral Metals (formerly Admiral Brass & Copper) might be worth a look if you want "industrial" shim stock. Both machine shops i worked for used them as a supplier when needed.
See: http://www.admiralmetals.com/
please visit Beall Glass Studio on Face Book
Post Reply