Tooting my own horn!

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Christyn Mattson
Posts: 18
Joined: Mon Mar 10, 2003 7:48 pm
Location: Clearwater, Florida

Tooting my own horn!

Post by Christyn Mattson »

Hi, everyone! After opening my first retail studio and gallery in October last year, the local paper came and did a story. It's in today's paper at:

http://www.wcfcourier.com/articles/2004 ... 9b.txt#top

It's exciting for me because warm glass is still pretty new in our area. Just thought I'd share! Thanks!

Christyn
Top
Don Burt
Posts: 573
Joined: Sun Mar 09, 2003 8:45 pm
Location: Cincinnati, Ohio
Contact:
Contact Don Burt

Re: Tooting my own horn!

Post by Don Burt »

Christyn Mattson wrote:Hi, everyone! After opening my first retail studio and gallery in October last year, the local paper came and did a story. It's in today's paper at:

http://www.wcfcourier.com/articles/2004 ... 9b.txt#top

It's exciting for me because warm glass is still pretty new in our area. Just thought I'd share! Thanks!

Christyn
Nice article. Congrats and good luck in your new studio too.
Top
Gabriel
Posts: 28
Joined: Sat Apr 19, 2003 4:36 pm
Location: Fort Wayne, IN

wtg

Post by Gabriel »

Way to go!
Top
PattyJohnson
Posts: 11
Joined: Sat Mar 22, 2003 1:43 am
Location: Wisconsin
Contact:
Contact PattyJohnson

Post by PattyJohnson »

Nice story...how exciting :D
Top
Post Reply

Return to “Techniques and Tools”