stainless steel molds - WarmGlass.com

stainless steel molds

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Tony Smith, Brad Walker

Post Reply
Celeste Stuhring
Posts: 1
Joined: Mon Mar 02, 2020 9:10 pm

stainless steel molds

Postby Celeste Stuhring » Wed Mar 04, 2020 2:38 pm

As long as they are coated properly, can you use any stainless steel bowl for draping? Any thickness? I found an unusual shape that I would love to use for draping..It says this...The bowls are Food grade 304 stainless steel and FDA approved. German technology designed for higher temperature, pressure and corrosion resistance. High quality, recyclable, last long and eco-friendly, also they are heavy duty brushed stainless on the outside which is the side I want to use. Thanks for any answers.

Dick
Posts: 79
Joined: Sun May 01, 2005 9:34 pm
Location: San Diego
Contact:

Re: stainless steel molds

Postby Dick » Wed Mar 04, 2020 9:48 pm

Yep. I sandblast and coat with kilnwash while hot for best results

Marty
Posts: 852
Joined: Mon Mar 10, 2003 3:58 pm
Location: Maine
Contact:

Re: stainless steel molds

Postby Marty » Sat Mar 07, 2020 7:59 pm

Spray the kw on.


Post Reply

Return to “Techniques and Tools”

Who is online

Users browsing this forum: No registered users and 45 guests

Warm Glass

2575 Old Glory Road, Suite 700
Suite 700
Clemmons, NC 27012
Phone: (336) 712 8003
Email: wg@warmglass.com