crinklized cbs glass - WarmGlass.com

crinklized cbs glass

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Tony Smith, Brad Walker

Post Reply
Linda Hassur
Posts: 43
Joined: Sat Mar 15, 2003 10:40 pm

crinklized cbs glass

Postby Linda Hassur » Fri Aug 14, 2020 7:10 am

I have been unable to get an answer from the CBS company regarding firing this glass in the kiln. I wanted to know if it needs to be capped with a clear glass or can it be fired without. Are there any problems with firing this glass as there is with dichroic (one side up or down) . It's too expensive to experiment so would appreciate any information others may have using this glass. Years ago I was on this forum quite a bit but haven't posted for years. I find like I have found my "old" friends and am anxious to start using all of the information available through it. thanks Linda

Brad Walker
Site Admin
Posts: 1349
Joined: Fri Mar 07, 2003 9:33 pm
Location: North Carolina, USA
Contact:

Re: crinklized cbs glass

Postby Brad Walker » Fri Aug 14, 2020 7:55 am

It can be fired without being capped but the top surface will be quite rough.

Barry Kaiser
Posts: 285
Joined: Mon Jul 25, 2005 6:54 pm
Location: North Carolina
Contact:

Re: crinklized cbs glass

Postby Barry Kaiser » Fri Aug 14, 2020 6:00 pm

I have had several occasions where small flecks of dichro coating popped around when fired.

Dick
Posts: 80
Joined: Sun May 01, 2005 9:34 pm
Location: San Diego
Contact:

Re: crinklized cbs glass

Postby Dick » Sun Aug 16, 2020 6:40 pm

Firing dichro down usually works better, plus never any sticking. I have had a little dichro pop off when face up. Problem is if you want to cap, you need to fire first as the dichro tends to bubble when capped


Post Reply

Return to “Techniques and Tools”

Who is online

Users browsing this forum: No registered users and 29 guests

Warm Glass

2575 Old Glory Road, Suite 700
Suite 700
Clemmons, NC 27012
Phone: (336) 712 8003
Email: wg@warmglass.com