Jen Ken vs Skutt - WarmGlass.com

Jen Ken vs Skutt

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Tony Smith, Brad Walker

Post Reply
Diane
Posts: 56
Joined: Sun Mar 09, 2003 3:59 pm
Location: Kennebunkport, Maine

Jen Ken vs Skutt

Postby Diane » Sun Apr 06, 2003 6:58 am

I know this has been debated before but I have a few questions.
I am trying to decide between
Jen Ken - Oval 13
and
Skutt GM 1414

The basic differences I can see are :
Skutt is SLIGHTLY larger (1 1/2"wider, 1/2"d&h)
the electrical draw is less on the Skutt (34.7amps vs 45amps)
Skutt comes with 13- 1" post
Skutt comes with the GlassMaster Digital controller, Jen Ken has the Bartlett 12-Key
JK comes with the 2 1/2" window

Are any of these features significant enough to make me choose one over the other? What are your thoughts between the two controllers? Customer service with either company?
I'm planning on calling Marty to ask his advise but wanted to run it by all of you first. This is alot of money for me to be spending so I want to make sure I'm getting the right one.
I value you're experience...PLEASE HELP...
Thanks, Diane :?

Tracy
Posts: 15
Joined: Thu Mar 20, 2003 7:23 pm
Location: Lexington, South Carolina

Postby Tracy » Sun Apr 06, 2003 9:49 am

Diane-
I have a jen-ken 11'' hexagon and just love it. One of the features I find invaluable is the window and would highly recommend it. I have found their customer service to be good also.
-Tracy

Jeri D
Posts: 65
Joined: Fri Mar 28, 2003 8:43 pm
Location: Martha's Vineyard.MA

Postby Jeri D » Sun Apr 06, 2003 6:17 pm

I have an Jen Ken Oval 9 and definitely go for the deeper one. I love the window because i love to peek and I am not brave ( or dumb)enough to
lift that lid when firing.
The lid is heavy and I have had trouble with a shelf, but it could be me too!
good luck
Jeri, still trying to figure it all out

rodney
Posts: 167
Joined: Mon Mar 10, 2003 12:05 pm
Location: new mexico
Contact:

jen ken,,,,,,,WHAT NICE PEOPLE

Postby rodney » Sun Apr 06, 2003 8:54 pm

i dont know know about other manufacturers, i have two jen ken kilns, and the people are great, excellent, numbero ono, the bestest of the best, i recommend their product as excellent and the PEOPLE as helpful, knowlegeable, and friendly

rodney

candala
Posts: 28
Joined: Tue Mar 25, 2003 7:44 am

Postby candala » Mon Apr 07, 2003 7:57 pm

Rodney, Jeri and Tracey -- which Jen Ken are you referring to that is so good (I'm in the market) for glass fusing and slumping. Would you say that the "Mini Fuse Kiln" 11" x 6 1/2" from Marty's site is it? :roll:

cindyj

Postby cindyj » Mon Apr 07, 2003 8:37 pm

I have Jen Ken 18" oval and am pleased. Bought it through Marty with great service and help to get it up and running. The top element gave out in January and when I called Jen Ken they took my serial number and had a new element out to me in 3 days.

Cindy

Brad Walker
Site Admin
Posts: 1348
Joined: Fri Mar 07, 2003 9:33 pm
Location: North Carolina, USA
Contact:

Re: Jen Ken vs Skutt

Postby Brad Walker » Mon Apr 07, 2003 9:16 pm

Diane wrote:I am trying to decide between
Jen Ken - Oval 13
and
Skutt GM 1414

The basic differences I can see are :
Skutt is SLIGHTLY larger (1 1/2"wider, 1/2"d&h)
the electrical draw is less on the Skutt (34.7amps vs 45amps)
Skutt comes with 13- 1" post
Skutt comes with the GlassMaster Digital controller, Jen Ken has the Bartlett 12-Key
JK comes with the 2 1/2" window

Are any of these features significant enough to make me choose one over the other? What are your thoughts between the two controllers? Customer service with either company?


I don't think that any of those features are significant enough to by themselves make you choose one brand over the other. The Skutt is slightly larger, but the Jen-Ken is more powerful. The GlassMaster controller is a bit easier to operate. The window is nice, but it will fog up and become useless after several years (at least mine has!).

Bottom line: Both companies make very good kilns and both are known for their service. I don't think you would regret choosing either one. (And Marty at Centre de Verre has excellent service, too.)

Diane
Posts: 56
Joined: Sun Mar 09, 2003 3:59 pm
Location: Kennebunkport, Maine

Postby Diane » Tue Apr 08, 2003 8:03 am

Thanks everyone for your advise. I talked to Marty last night and I think I've decided to go with the Jen Ken. I like the idea of the window and he has one IN STOCK (quicker delivery) Now I just have to make room for it.
I can't WAIT :lol:
Diane


Post Reply

Return to “Techniques and Tools”

Who is online

Users browsing this forum: Google [Bot] and 56 guests

Warm Glass

2575 Old Glory Road, Suite 700
Suite 700
Clemmons, NC 27012
Phone: (336) 712 8003
Email: wg@warmglass.com

cron