Fusing herringbone and Reed Bullseye Glass

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Scott
Posts: 2
Joined: Wed Apr 07, 2004 1:40 pm

Fusing herringbone and Reed Bullseye Glass

Post by Scott »

help...what fusing temp should be used in order to keep the tecture of the herringbone and reed glass intact?

Regards,

scott
Top
Stuart Clayman
Posts: 224
Joined: Mon Mar 31, 2003 12:35 pm
Location: Virginia
Contact:
Contact Stuart Clayman

Post by Stuart Clayman »

Are you going to cap the glass?
Kiln Repair by a Clayman kilnrepair@yahoo.com
Glassworks by a Clayman
http://www.GlassArtists.org/GlassworksByAClayman
Top
Scott
Posts: 2
Joined: Wed Apr 07, 2004 1:40 pm

Post by Scott »

one design yes and another design no.
Top
Post Reply

Return to “Techniques and Tools”