help with programing - WarmGlass.com

help with programing

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Tony Smith, Brad Walker

Post Reply
bkfoltz
Posts: 18
Joined: Thu Mar 13, 2003 12:38 pm
Location: Minnesota

help with programing

Postby bkfoltz » Wed Apr 23, 2003 3:46 pm

I have a small manual kiln at home.

At the school where I work (I do technology) we have a skutt km-1027 with a kilnmaster controller. since I do glass at home the art teacher thought it would be fun to show the kids something new, and I was able to get 56# of COE90 glass donated from someone that posts at this site.

We going to be doing some tiles with the kids. The tiles will have 2 layers - a base of 3x3 or 2x2 and then mosaic size frit.

I will be firing several shelves at a time on thin fire shelf paper. It will not matter if all the shelves are not full fused. I plan on doing a test fire on friday, then doing the kids tiles next week.

Could someone please send my the firing schedule to start with. I am not sure what to start with, and of course we can not find the manual.

Thanks Kris

charlie
Posts: 961
Joined: Mon Mar 10, 2003 3:08 pm

Postby charlie » Wed Apr 23, 2003 3:52 pm

d/hour final hold
600 1480 20
9999 970 20
120 850 0
200 700 0
off

Ron Coleman
Posts: 468
Joined: Sun Mar 09, 2003 3:20 pm
Location: Columbus, Ohio USA

The Kiln Master maunal

Postby Ron Coleman » Wed Apr 23, 2003 4:10 pm

The manual for the controller

http://www.skutt.com/support/op-man.html

Ron


Post Reply

Return to “Techniques and Tools”

Who is online

Users browsing this forum: No registered users and 48 guests

Warm Glass

2575 Old Glory Road, Suite 700
Suite 700
Clemmons, NC 27012
Phone: (336) 712 8003
Email: wg@warmglass.com