help with programing

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
bkfoltz
Posts: 18
Joined: Thu Mar 13, 2003 12:38 pm
Location: Minnesota

help with programing

Post by bkfoltz »

I have a small manual kiln at home.

At the school where I work (I do technology) we have a skutt km-1027 with a kilnmaster controller. since I do glass at home the art teacher thought it would be fun to show the kids something new, and I was able to get 56# of COE90 glass donated from someone that posts at this site.

We going to be doing some tiles with the kids. The tiles will have 2 layers - a base of 3x3 or 2x2 and then mosaic size frit.

I will be firing several shelves at a time on thin fire shelf paper. It will not matter if all the shelves are not full fused. I plan on doing a test fire on friday, then doing the kids tiles next week.

Could someone please send my the firing schedule to start with. I am not sure what to start with, and of course we can not find the manual.

Thanks Kris
Post Reply