Glass Kilns, vertical WBS, Small sandblaster for sale - WarmGlass.com

Glass Kilns, vertical WBS, Small sandblaster for sale

This is for posting advertisements to buy and sell products or services, or to announce job openings or searches. A fee may be required for posts in this forum. All posts must be approved prior to display. For complete forum rules, check here: http://www.warmglass.com/glassifieds

Moderator: Brad Walker

Post Reply
Carla K
Posts: 3
Joined: Fri Nov 02, 2018 9:49 pm

Glass Kilns, vertical WBS, Small sandblaster for sale

Postby Carla K » Mon Nov 05, 2018 5:55 pm

Burbank, California (Southern California)

A colleague's brother passed away unfortunately and had a glass fusing set up going. They must be sold because the shop is moving and my colleague does not fuse glass. It would be great to find a good home for these items.

1. Denver Custom Production Kiln for glass fusing. $3000 or best offer. Very large interior 4 feet by 6 foot interior. It is in excellent condition and works well. Lid has springs that attach for lifting; the springs are just not attached in the picture. The coils and fiber are in excellent condition and can be replaced as needed. Has RTC 1000 controller. The kiln is hard wired for electric. The kiln has a new, smooth shelf and has large piece of fiber paper covering the current shelf. There is a large roll of fiber paper to use with it. Kiln works well.


Will need a local pick up (but it could fit in the back of a pick up truck, so could be moved further away) and a forklift to move. But is an excellent opportunity for someone that wants to fuse glass on a large scale or open a professional studio. The kiln may be moved to temporary storage where a forklift is available for loading.



2. L & L Glass Kiln Model GS1714 Brick Lined, L&L Kilns Dyna-Fire Control. $1000 or best offer. Inside Dimensions 15" x 10" x 12" Works great, in excellent condition. excellent for beading work. great small kiln that is well put together. Door lifts upward.

3. CRL 106" wet abrasive belt grinder.
$700 or best offer.
Machine is older but still works. For sanding glass or other materials. There are some accompanying belts included, but they have been used. This is an older machine but still works.

4. ATD tools smaller sized blasting cabinet and ATD 90 lb pressure pot blaster for sale. The set up was bought to use for art glass/stained glass work. The setup was used very little. It is a bit dusty, but works. Also could be used for automotive work or other applications. Cabinet is in excellent shape, sealed nicely (better than harbor freight type). Pressure pot needs a new seal, but this is part of the regular maintenance.

$400 or best offer.
Attachments
cabinet 1.jpg
LL kiln 1.jpg
cabinet 1.jpg

Carla K
Posts: 3
Joined: Fri Nov 02, 2018 9:49 pm

Re: Glass Kilns, vertical WBS, Small sandblaster for sale

Postby Carla K » Wed Nov 07, 2018 3:04 pm

pictures of denver kiln
Attachments
denver kiln 2.jpg
denver kiln 1.jpg

Carla K
Posts: 3
Joined: Fri Nov 02, 2018 9:49 pm

Re: Glass Kilns, vertical WBS, Small sandblaster for sale

Postby Carla K » Thu Nov 29, 2018 3:09 pm

Sandblaster is sold, but vertical wet belt grinder and two kilns are still available. Excellent opportunity for someone in southern California.
Thanks


Post Reply

Return to “Buy and sell”

Who is online

Users browsing this forum: No registered users and 2 guests

Warm Glass

2575 Old Glory Road, Suite 700
Suite 700
Clemmons, NC 27012
Phone: (336) 712 8003
Email: wg@warmglass.com