Finally sharing some work

Want to share a photo of your work? Or get feedback on a new piece? Post it here. (Note: items in this forum are deleted periodically, generally after several months.)

Moderator: Brad Walker

Post Reply
gottev
Posts: 17
Joined: Tue Feb 07, 2012 12:17 am

Finally sharing some work

Post by gottev »

After several years of learning from all of you, I finally feel I have a piece worthy of sharing. Made with BE powders, and hand pulled (BE) virtigraph. I used vitrigel as the binder, but hand shaped before fusing. I did use a small amount of fiber paper to maintain the shape while firing. The finished piece is 10" x 4 1/2" and about 1" high.
Attachments
Final Calla Lily-2.jpg
Final Calla Lily-5.jpg
JestersBaubles
Posts: 705
Joined: Fri Feb 25, 2011 12:01 am
Location: North Logan, UT
Contact:

Re: Finally sharing some work

Post by JestersBaubles »

Nicely, beautifully done!

Dana W.
Buttercup
Posts: 627
Joined: Mon Jan 28, 2008 5:22 pm
Location: S.E. Queensland Australia

Re: Finally sharing some work

Post by Buttercup »

Wow! that's impressive. Well done. Jen
The Hobbyist
Posts: 308
Joined: Sun Mar 09, 2003 7:09 pm
Location: Sun City West (NW Phoenix), AZ
Contact:

Re: Finally sharing some work

Post by The Hobbyist »

Exceptional work. Congratulations!

Jim "The Hobbyist"
"With or without religion, good people can behave well and bad people can do evil; but for good people to do evil—that takes religion. " Steven Weinberg
gottev
Posts: 17
Joined: Tue Feb 07, 2012 12:17 am

Re: Finally sharing some work

Post by gottev »

thank you, Dana, Jen, and Jim. I really appreciate the vote of confidence.
Havi
Posts: 619
Joined: Wed Jul 02, 2003 6:01 am
Location: Israel
Contact:

Re: Finally sharing some work

Post by Havi »

As said above, very nice!

Good for you


Havi
Haviva Z
- - - - with a smile :)

"Speed comes from the Devil" - (an Arabic proverb)
Image
http://www.havivaz.com
Post Reply