Putting it out there... - WarmGlass.com

Putting it out there...

Want to share a photo of your work? Or get feedback on a new piece? Post it here. (Note: items in this forum are deleted periodically, generally after several months.)

Moderator: Brad Walker

Post Reply
Siyeh
Posts: 8
Joined: Fri Jan 02, 2004 10:37 am
Location: Atlanta, GA USA
Contact:

Putting it out there...

Postby Siyeh » Fri Apr 09, 2004 5:12 pm

Haven't ever put work up for other artists' critique/comments. Heck, barely have a website! But thought I'd give it a go. Be gentle please...

http://www.glassartists.org/Gallery.asp?GalleryID=5300

Brenda Griffith
Siyeh Studio

Ron Coleman
Posts: 468
Joined: Sun Mar 09, 2003 3:20 pm
Location: Columbus, Ohio USA

Postby Ron Coleman » Fri Apr 09, 2004 6:22 pm

Some nice refreshing designs. I like "Dreaming Gecko" the best, "Puzzeling One" is a close second/

Nice work, thanks for sharing.
Ron

[img:35:20]http://mrcol.freeyellow.com/coffee.gif[/img]

lauren
Posts: 91
Joined: Fri Apr 11, 2003 9:31 pm
Location: Naples FL

Postby lauren » Fri Apr 09, 2004 7:49 pm

Image

i LOVE symphonic meditiations.

i'm not a good critiquer, so i can't offer much more than that...but i'm quite enamored.

congrats

peace
- lauren
Last edited by lauren on Fri Apr 09, 2004 10:04 pm, edited 1 time in total.

quill
Posts: 107
Joined: Wed Apr 02, 2003 10:35 am
Location: BC
Contact:

Postby quill » Fri Apr 09, 2004 8:31 pm

All I can say is- Wonderful, wonderful! What a fresh 'voice' you have.

Terry Ow-Wing
Posts: 124
Joined: Sun Mar 09, 2003 3:21 pm
Location: San Francisco, Ca.
Contact:

Postby Terry Ow-Wing » Sat Apr 10, 2004 3:10 am

I like Cailleach's Cradle .Nice Texture. Is that sandblastedwork? or?
-Terry Ow-Wing
Terry Ow-Wing Designs
Kilnformed and Lampworked Glass Art
http://GlassArt.weebly.com
Image

Siyeh
Posts: 8
Joined: Fri Jan 02, 2004 10:37 am
Location: Atlanta, GA USA
Contact:

Postby Siyeh » Sat Apr 10, 2004 9:38 am

The blue on Cailleach's Cradle is freeform kiln cast branches which are then fused onto a fused plate--I do the casting of the branches and the fusing of the blanks for the plate in the same firing. The second fuse is just over tack. Then it is control slumped (not fully slumped) into a ceramic mold. Then the branches are free-hand sandblast carved and finally both sides are sandblast etched. :) I like to mix it up.
Brenda Griffith
Siyeh Studio http://www.siyehstudio.com
Glass Incarnate Daily Blog http://glassincarnate.blogspot.com/
A Beginner's Guide to Kiln-Formed Glass http://glassincarnate.com/thebook.html

Terry Ow-Wing
Posts: 124
Joined: Sun Mar 09, 2003 3:21 pm
Location: San Francisco, Ca.
Contact:

Postby Terry Ow-Wing » Sat Apr 10, 2004 3:11 pm

:D :D definately very creative in both design and technique! :wink: Congrats,
-Terry O.
Terry Ow-Wing Designs
Kilnformed and Lampworked Glass Art
http://GlassArt.weebly.com
Image

PDXBarbara
Posts: 292
Joined: Sun Mar 09, 2003 4:09 pm
Location: Portland, OR

Postby PDXBarbara » Sat Apr 10, 2004 4:31 pm

I'm ESPECIALLY enamoured w/ Cradle! It's enticing. My connection with it was immediate. Thanks for posting it.

Barbara
Barbara Bader


Post Reply

Return to “Photos and Stuff”

Who is online

Users browsing this forum: No registered users and 7 guests

Warm Glass

2575 Old Glory Road, Suite 700
Suite 700
Clemmons, NC 27012
Phone: (336) 712 8003
Email: wg@warmglass.com