Sticking Kilnwash, Better Kilnwash? - WarmGlass.com

Sticking Kilnwash, Better Kilnwash?

Use this forum for discussion on kiln casting, pate de verre, and related topics.

Moderator: Brad Walker

Post Reply
Teknoron
Posts: 14
Joined: Thu Feb 16, 2012 6:32 pm
Contact:

Sticking Kilnwash, Better Kilnwash?

Postby Teknoron » Wed Feb 20, 2013 9:22 pm

I do mainly frit casting , I kilnwash all of my molds using a airbrush with several coats toss them in the kiln dry them and repeat. I also use slide 1800 boron spray, overkill maybe after losing a couple of molds I rather be safe than sorry. Anyway I bought some kilnwash some time ago and it is nearly used up. Not sure the name or brand bought it from a local shop. Then one thing I hate about it is that 80% of the time I have kilnwash stuck to my pieces, little vinegar and it washes off but I have to spray the mold again. Is there a better solution, I found paragons liquid kilnwash, primo primer and hi-fire. Which would be the best to use.

jim simmons
Posts: 452
Joined: Sun Mar 09, 2003 10:37 pm
Location: Hillsboro Oregon
Contact:

Re: Sticking Kilnwash, Better Kilnwash?

Postby jim simmons » Fri Feb 22, 2013 9:24 pm

mr 97 from colour de veere
Jim

Joe Pfeifer
Posts: 24
Joined: Thu May 27, 2010 9:55 pm

Re: Sticking Kilnwash, Better Kilnwash?

Postby Joe Pfeifer » Fri Feb 22, 2013 11:41 pm

If you are making your own molds, and if you use an investment such as R&R 910 glass cast, you do not need any kiln wash. The glass releases beautifully!


Post Reply

Return to “Kiln Casting”

Who is online

Users browsing this forum: No registered users and 3 guests

Warm Glass

2575 Old Glory Road, Suite 700
Suite 700
Clemmons, NC 27012
Phone: (336) 712 8003
Email: wg@warmglass.com