Thoughts on Casting Kilns - WarmGlass.com

Thoughts on Casting Kilns

Use this forum for discussion on kiln casting, pate de verre, and related topics.

Moderator: Brad Walker

Post Reply
nbobb
Posts: 25
Joined: Mon Aug 16, 2004 1:35 pm
Location: California
Contact:

Thoughts on Casting Kilns

Postby nbobb » Sun May 01, 2016 9:24 pm

I need a deeper kiln for casting and I've been thinking a ceramic kiln would have the configuration I need. I wouldn't need top elements for the type of casting I'm doing, in fact it might work better without. I can get quite a bit of depth with this type of kiln, as long as my back holds out.

What type of casting kilns do most of you use? Do any of you use ceramic kilns?
Nancy Bobb
Firewalker Studio
http://www.firewalkerstudio.com

Peter Angel
Posts: 186
Joined: Fri Oct 31, 2008 9:26 am
Location: Newtown, Sydney, Australia.

Re: Thoughts on Casting Kilns

Postby Peter Angel » Sun May 08, 2016 7:12 pm

A ceramic kiln with elements in the 3 walls and the door works fine. Pete
Peter Angel
http://peterangelart.blogspot.com/

A bigger kiln, A bigger kiln, my kingdom for a bigger kiln.

nbobb
Posts: 25
Joined: Mon Aug 16, 2004 1:35 pm
Location: California
Contact:

Re: Thoughts on Casting Kilns

Postby nbobb » Wed May 11, 2016 7:32 pm

Thank you, Peter!
Nancy Bobb
Firewalker Studio
http://www.firewalkerstudio.com


Post Reply

Return to “Kiln Casting”

Who is online

Users browsing this forum: No registered users and 7 guests

Warm Glass

2575 Old Glory Road, Suite 700
Suite 700
Clemmons, NC 27012
Phone: (336) 712 8003
Email: wg@warmglass.com