Ever hear of these kiln shelves?

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Cheryl
Posts: 239
Joined: Sun Mar 09, 2003 7:56 pm
Location: Tallahassee FL
Contact:

Ever hear of these kiln shelves?

Post by Cheryl »

Was online looking for rectangular shelves to chop up when I stumbled on these. They're pretty pricey, but otherwise sound terrific!

http://www.baileypottery.com/kilnfurnit ... helves.htm
Barbara Muth
Posts: 382
Joined: Sun Mar 09, 2003 8:10 pm
Location: Washington DC Metropolitan Area
Contact:

Post by Barbara Muth »

yah but if it has absorbed any moisture it explodes unless you ramp up verrrry slowly.

that's a shame.

Barbara
Barbara
Check out the glass manufacturer's recommended firing schedules...
LATEST GLASS
Terry Ow-Wing
Posts: 124
Joined: Sun Mar 09, 2003 3:21 pm
Location: San Francisco, Ca.
Contact:

Post by Terry Ow-Wing »

I actually have some samples of them. The company that sent it to me was not familiar with any glass users. So far my 2 test of point loads of 4 layers of glass on one spot has had them survive. I just have not had anytime to really go at it though. Interesting about exploding - where did you find this out?

[/quote]
Terry Ow-Wing Designs
Kilnformed and Lampworked Glass Art
http://GlassArt.weebly.com
Image
Susan Moore
Posts: 96
Joined: Mon Oct 06, 2003 10:07 pm
Location: Austin, TX
Contact:

Post by Susan Moore »

If you scroll down to the bottom of their website there is a warning about the moisture/exploding issue.

Susan
Nikki ONeill
Posts: 169
Joined: Mon Mar 10, 2003 11:55 am
Location: Silver Spring, MD
Contact:

Post by Nikki ONeill »

I talked to a rep at Bailey who told me that the Advantage shelves are meant to be used only above 1800 degrees, in a reducing atmosphere. They will deteriorate if used at lower tempertures. Evidently the components in the shelf must re-form and that only happens at the higher temperatures. However there is an even more expensive material that can be special ordered that is oxidation resistant. I'll post more info if it looks good.
Nikki
Cheryl
Posts: 239
Joined: Sun Mar 09, 2003 7:56 pm
Location: Tallahassee FL
Contact:

explosion warnings

Post by Cheryl »

posted right on the web site. Of course, we have similar problems with trapped water so I wasn't horribly put off by it. Then again, I NEVER "know better."
Post Reply