This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.
Moderators: Brad Walker , Tony Smith
Cheryl
Posts: 239 Joined: Sun Mar 09, 2003 7:56 pmLocation: Tallahassee FL
Contact:
Post
by Cheryl Sat Jan 10, 2004 9:17 pm
Diagnosis. That's what's so hard - when you know just enough to do something, but not enough to figure out what's going wrong. Today, it's the sandblaster - got all the parts, got all the settings, got no blast, got nobody near enough to call in to take a look.
Brock
Posts: 1519 Joined: Mon Mar 10, 2003 1:32 pmLocation: Vancouver, B.C.
Post
by Brock Sat Jan 10, 2004 9:25 pm
Art! It's not just a job, it's a pesky frustration.
Tony Smith
Posts: 1037 Joined: Sun Mar 09, 2003 5:59 pmLocation: Massachusetts, USA
Contact:
Post
by Tony Smith Sat Jan 10, 2004 10:54 pm
take a deep breath.... in.... out.... in.... out....
The tightrope between being strange and being creative is too narrow to walk without occasionally landing on both sides..." Scott Berkun
Cheryl
Posts: 239 Joined: Sun Mar 09, 2003 7:56 pmLocation: Tallahassee FL
Contact:
Post
by Cheryl Sat Jan 10, 2004 11:22 pm
Sandblasting and Yoga instructor.
Tony Smith
Posts: 1037 Joined: Sun Mar 09, 2003 5:59 pmLocation: Massachusetts, USA
Contact:
Post
by Tony Smith Sat Jan 10, 2004 11:46 pm
it's 0° at my house and 2° 10 miles away at Foxboro Stadium where the game is tied...
The tightrope between being strange and being creative is too narrow to walk without occasionally landing on both sides..." Scott Berkun
dee
Posts: 302 Joined: Tue Mar 11, 2003 5:20 pmLocation: Atlanta GA
Contact:
Post
by dee Sun Jan 11, 2004 1:36 pm
Tony Smith wrote: it's 0° at my house and 2° 10 miles away at Foxboro Stadium where the game is tied...
he tony - it's 37 deg here in huntsville hehehehehe
D