Ron-Sierra has AF-3 Orton,one-4 segment program

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
ruthelf1030
Posts: 17
Joined: Mon Jan 05, 2004 3:15 pm
Location: Melrose, MN

Ron-Sierra has AF-3 Orton,one-4 segment program

Post by ruthelf1030 »

Thank you,
It is Orton, but instead of the fourth program, the programmable one,
having 8 segments to use, it only has 4.
The new Sierra's have 8 segments in that 4th program.
That is fine-I can use that now I see, up or down, but the
directions they send are really horrible/
The PMC connection helped really a lot, and now I have
an address and phone number for Orton.

My directions are for 5, 8, and 12 hour programs, no other directions.

Why don't they tell people these things.
Good luck with your glass endeavors
you sure helped me!
Regards,
Ruth
Post Reply