This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.
Moderators: Brad Walker , Tony Smith
Liam
Posts: 90 Joined: Sun Mar 09, 2003 10:25 pm
Location: Houston, TX
Post
by Liam » Thu Feb 12, 2004 10:36 pm
I think I have it fixed this time.
this is a sample of gecco clear used to make beads. Pretty cloudy
Liam
Rebecca M.
Posts: 126 Joined: Fri Sep 12, 2003 12:15 pm
Location: Myrtle Beach
Contact:
Post
by Rebecca M. » Thu Feb 12, 2004 11:25 pm
Liam, when you say beads, do you mean torchwork or fused?
Liam
Posts: 90 Joined: Sun Mar 09, 2003 10:25 pm
Location: Houston, TX
Post
by Liam » Thu Feb 12, 2004 11:44 pm
Torch beads. the samples I made are a little under an inch wide
daffodildeb
Posts: 125 Joined: Mon Jul 28, 2003 3:48 am
Location: Hot Springs Village, AR
Post
by daffodildeb » Fri Feb 13, 2004 6:33 am
If that little red X is what it looks like, I don't think I'll use the stuff. Can you post another link?
Deb
Liam
Posts: 90 Joined: Sun Mar 09, 2003 10:25 pm
Location: Houston, TX
Post
by Liam » Fri Feb 13, 2004 8:15 am
my new, so called fixed web site, is apparently having fits and seems to be jamming from time to time. Problems with the modem...Grrr.
Liam
Kim Bellis
Posts: 133 Joined: Sat Jun 14, 2003 9:48 pm
Location: Tampa, Florida
Contact:
Post
by Kim Bellis » Fri Feb 13, 2004 8:38 am
Liam:
The gecko does look real cloudy. I stick with moretti for my torch work - although I have heard that Lucisa clear (excuse spelling) works really well
Kim