Aluminum Oxide

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Alecia Helton
Posts: 108
Joined: Mon Aug 25, 2003 12:35 am
Location: outside of Dallas TX

Aluminum Oxide

Post by Alecia Helton »

Where do you buy aluminum oxide?

Alecia
Alecia Helton
Wear Original Wonders!
Carrollton TX
Valerie
Posts: 42
Joined: Sun Mar 09, 2003 7:01 pm
Location: Kentwood Michigan

Locally

Post by Valerie »

I just looked in the phone book under Sand Blasting
called around to get the best prices.
I buy the minimum 50# for $25
http://www.gnpltd.com/
It is local for me ...but they do ship
Darrin Strosnider
Posts: 16
Joined: Tue Mar 11, 2003 10:33 am
Location: Desert Southwest

Post by Darrin Strosnider »

I found it under "Abrasives". Do shop around. I found that prices vary dramatically. $25 for a 50lb bag is what I pay too.
lohman
Posts: 97
Joined: Tue Mar 11, 2003 4:57 pm
Location: Annapolis, MD
Contact:

Post by lohman »

I just talked to a guy who makes stone monuments. He told me about something called "Banding Sand" and he says it's a very sharp, efficient abrasive. Cheap, too. I was talking to him about sandblasting a photographic image and he says I should use this "banding sand".

It's 0000 (four O s) size particle, said if the particle was any smaller it would be dust. He get's it from Bicknell Supply somewhere in Georgia.

Call 1-800-241-7105.

I'm going to try it as soon as I can get it.

Oh yea, He says he uses tons of it and gets it for about $7.50/ 100 lbs.
Kevin Midgley
Posts: 773
Joined: Mon Mar 10, 2003 11:36 am
Location: Tofino, British Columbia, Canada

Post by Kevin Midgley »

Sand is cheap. Sand is use once. Aluminum oxide you can reuse over and over again. Sand is usually slow cutting. Aluminum oxide is faster cutting. Now which is cheaper? Kevin
Post Reply