George's Rigidizer

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
dkingman
Posts: 3
Joined: Sun Feb 12, 2006 11:34 am
Location: Eugene, OR
Contact:
Contact dkingman

George's Rigidizer

Post by dkingman »

Has anyone used George's Rigidizer? It is a blue-green liquid. I coated 1/8 inch fiber with it but noticed the back was still white. Should I coat the back as well? There was no instructions for pre-firing it.

Thanks,

Dave
Top
rosanna gusler
Posts: 730
Joined: Mon Mar 10, 2003 2:22 pm
Location: wanchese north carolina
Contact:
Contact rosanna gusler

Re: George's Rigidizer

Post by rosanna gusler »

i would coat both sides. Fire to whatever temp you are going to use it at kiln wash and use .rosannat
artist, owner of wanchese art studio, marine finisher
Top
dkingman
Posts: 3
Joined: Sun Feb 12, 2006 11:34 am
Location: Eugene, OR
Contact:
Contact dkingman

Re: George's Rigidizer

Post by dkingman »

Thanks Rosanna
Top
Post Reply

Return to “Techniques and Tools”