Hake Brushes - WarmGlass.com

Hake Brushes

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Tony Smith, Brad Walker

Post Reply
RHunter
Posts: 19
Joined: Tue Jan 24, 2006 8:44 pm
Location: Honolulu, Hawaii

Hake Brushes

Postby RHunter » Tue Jul 09, 2013 5:49 pm

Hi All,

I dislike coating molds, and kiln shelves, with a Hake Brush....orthodoxy says use one.....without ever explaining why.....nor how to avoid the endless shedding these things put out, much like a long haired dog.

Questioning Authority leads me to ask, WHY ?

I understand from Googling other site sources that Hake Brushes hold a boatload of water, which gives good results puddling kiln wash, onto said mold or kiln shelf, also their fine-ness prevents dislodging previous layers of material as multiple layers are needed to effectively coat a shelf or mold.

I wonder if back in the day , this was a good cheap solution to getting good coverage without crumbling off the previous layer on successive coatings.

Does anyone know of a technologically advanced manual alternative ( thus not air brush, etc ) be it a type of paint brush , or alternative method that would accomplish this task without endless holidays and the requisite picking out of stray hairs....maybe I should just use a long haired dog though that would introduce a whole new set of problems , what with squirming and all. <G>

There are endless varieties of these type brushes available in Japan, and they are used to paint with....(houses) and for the life of me I don't know how they manage....

thanks,
Randy

Bert Weiss
Posts: 2337
Joined: Tue Mar 11, 2003 12:06 am
Location: Chatham NH
Contact:

Re: Hake Brushes

Postby Bert Weiss » Tue Jul 09, 2013 6:12 pm

You can spray it on with a mouth atomizer or it's automated cousin the Paasche 62 sprayer.

The mouth atomizer is what I call " a cheap thrill."
Bert

Bert Weiss Art Glass*
http://www.customartglass.com
Furniture Lighting Sculpture Tableware
Architectural Commissions

Stephen Richard
Posts: 302
Joined: Sun Jul 06, 2003 4:36 pm
Location: Glasgow, Scotland
Contact:

Re: Hake Brushes

Postby Stephen Richard » Tue Jul 09, 2013 6:17 pm

They manage because they use high quality brushes. Really, most of the brushes we get are inferior.
You can spray batt wash on with a mouth atomiser if you like. Need to mix the separator more thinly, and so apply more coats. But it works
Steve Richard
You can view my Blog at: http://verrier-glass.blogspot.com/

Kevin Midgley
Posts: 713
Joined: Mon Mar 10, 2003 11:36 am
Location: Tofino, British Columbia, Canada

Re: Hake Brushes

Postby Kevin Midgley » Tue Jul 09, 2013 6:30 pm

If they are falling out in the store then they aren't the ones you want to use. Try a pottery supply place and pay the premium. Synthetics will work but if you like to apply the wash to a pre-warmed shelf, they may just melt and cause other problems.

Peter Angel
Posts: 186
Joined: Fri Oct 31, 2008 9:26 am
Location: Newtown, Sydney, Australia.

Re: Hake Brushes

Postby Peter Angel » Tue Jul 09, 2013 6:55 pm

Potters use Hake brushes to brush transparent glaze onto bisqued fired ceramics.

They trim the hake brush bristles down to 1/2 the original length.

You could use sharp scissors or a sharp blade to trim the bristles.

I'm planing to try this soon and I will let you know the results.

Pete
Peter Angel
http://peterangelart.blogspot.com/

A bigger kiln, A bigger kiln, my kingdom for a bigger kiln.

Yardic Glassworks
Posts: 80
Joined: Sat Mar 06, 2010 9:29 am

Re: Hake Brushes

Postby Yardic Glassworks » Tue Jul 09, 2013 7:52 pm

I use a high quality paint brush for all my shelves and molds. Works great with no shedding.
Tim Yardic
Yardic Glassworks

bob proulx
Posts: 186
Joined: Tue Dec 29, 2009 7:13 pm
Location: Nahant Massachusetts
Contact:

Re: Hake Brushes

Postby bob proulx » Wed Jul 10, 2013 7:06 am

I use the cheap foam brushs you buy at any hardware store and they work fine. Leave them in the kiln wash and they last a long time. Which ever brush you use if you want a smoother finish on the shelf use an old pair of nylons and rub lightly.
Bob

Valerie Adams
Posts: 587
Joined: Mon Apr 19, 2004 2:49 pm
Location: Santa Rosa, California
Contact:

Re: Hake Brushes

Postby Valerie Adams » Wed Jul 10, 2013 11:06 am

I used to use a small paint roller to apply wash to shelves.
Then I switched to spraying on with a garden sprayer.
(With both methods, I needed to smooth the wash a bit when it was dry.)
In past years I've gone back to the brush, deciding it's simpler. I simply wipe off the few stray hairs when the wash is dry.


Post Reply

Return to “Techniques and Tools”

Who is online

Users browsing this forum: No registered users and 39 guests

Warm Glass

2575 Old Glory Road, Suite 700
Suite 700
Clemmons, NC 27012
Phone: (336) 712 8003
Email: wg@warmglass.com