From Arnold at Paragon

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Arnold Howard
Posts: 47
Joined: Mon Oct 13, 2003 5:21 pm
Location: Converse, Texas USA
Contact:

From Arnold at Paragon

Post by Arnold Howard »

Hi,

I just placed an announcement in the business section of the forums. I'm adding a note here in case some of you don't visit the business section.

Todd Lokash is the new company president. For more information, please see the forum business section or visit www.paragonweb.com home page. Feel free to ask questions or make comments.

Thank you,

Sincerely,

Arnold Howard
Paragon Industries, L.P., Mesquite, Texas USA
ahoward@paragonweb.com / www.paragonweb.com
Barry Kaiser
Posts: 307
Joined: Mon Jul 25, 2005 6:54 pm
Location: North Carolina
Contact:

Re: From Arnold at Paragon

Post by Barry Kaiser »

As long as Sheila is there, everything will get done right.
Arnold Howard
Posts: 47
Joined: Mon Oct 13, 2003 5:21 pm
Location: Converse, Texas USA
Contact:

Re: From Arnold at Paragon

Post by Arnold Howard »

Barry Kaiser wrote:As long as Sheila is there, everything will get done right.
Barry, thanks for your comment. We are fortunate to have Shelia. I knew that even before she began working here. She has a high level of common sense and cares about the customer and the quality of the kilns.

Sincerely,

Arnold Howard
Paragon Industries, L.P., Mesquite, Texas USA
ahoward@paragonweb.com / http://www.paragonweb.com
jim simmons
Posts: 478
Joined: Sun Mar 09, 2003 10:37 pm
Location: Hillsboro Oregon
Contact:

Re: From Arnold at Paragon

Post by jim simmons »

What Barry said in spades
jim

Arnold Howard wrote:
Barry Kaiser wrote:As long as Sheila is there, everything will get done right.
Barry, thanks for your comment. We are fortunate to have Shelia. I knew that even before she began working here. She has a high level of common sense and cares about the customer and the quality of the kilns.

Sincerely,

Arnold Howard
Paragon Industries, L.P., Mesquite, Texas USA
ahoward@paragonweb.com / http://www.paragonweb.com
Post Reply