Soft sandblasting media
Moderators: Brad Walker, Tony Smith
-
- Posts: 190
- Joined: Mon Jul 19, 2004 2:08 pm
- Location: River Falls, WI
- Contact:
Soft sandblasting media
Does anyone out there have any experience with the various "soft" sandblasting media for removing mold residue from fired glass? I have used fine hard media at low pressure for this removal in the past but they are still pretty aggressive on the glass. I know that there are soft media like crushed walnut shells, crushed corn cob and plastic grit that are available but I thought that I should see what others thought.
Re: Soft sandblasting media
Peter's had luck with soda blasters and at some point I'll try one. Right now, though, I've got a plain old power washer that's doing a wonderful job of removing all mold residue, so I haven't needed to change anything.
Cynthia Morgan
Marketeer, Webbist, Glassist
http://www.morganica.com/bloggery
http://www.cynthiamorgan.com
"I wrote, therefore I was." (me)
Marketeer, Webbist, Glassist
http://www.morganica.com/bloggery
http://www.cynthiamorgan.com
"I wrote, therefore I was." (me)