i need a kiln controller

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
pfunkglass
Posts: 1
Joined: Sun Apr 27, 2003 2:37 am
Location: Myrtle Beach SC

i need a kiln controller

Post by pfunkglass »

hey to everyone
im new to this site and i hope maybe i can find a kiln controll for a paragon kiln any help is greatlly appriciated
thank you and email me at parliamentl100@aol.com
pfunk
Top
Kitty
Posts: 444
Joined: Sun Mar 09, 2003 4:12 pm
Location: Gig Harbor, WA

Post by Kitty »

my Paragon has a Bartlett controller. you can contact them at http://www.bartinst.com/
Top
watershed
Posts: 166
Joined: Wed Mar 12, 2003 1:44 am

Post by watershed »

I've been thinking about the Fuji. Check Craftwebs Earthbound suppliers for TTI. They are cheap, though I have not used one yet.

Greg
Top
Ron Coleman
Posts: 468
Joined: Sun Mar 09, 2003 3:20 pm
Location: Columbus, Ohio USA

Plug and Go

Post by Ron Coleman »

If you want one to just plug in and go, check this link.

http://www.cdvkiln.com/menuccremo.htm

Ron
Top
Dani
Posts: 493
Joined: Mon Mar 10, 2003 3:17 pm
Contact:
Contact Dani

Post by Dani »

I thought Marty told us we couldn't "just plug in and go".... I remember thinking about one of those for the big Skutt, but it would still have needed some re-wiring... or some kind of modification. Does anyone remember this thread? Thanks ~ D.
Top
Post Reply

Return to “Techniques and Tools”