Help with Black Cupric Oxide?

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Lodahl Art Glass
Posts: 1
Joined: Mon Nov 26, 2007 2:43 pm

Re: Help with Black Cupric Oxide?

Post by Lodahl Art Glass »

thank you Rosanna. Could you tell me how high you fired it? I fired 4 tiles and was real careful about not putting any tin sides against the oxide. Maybe the firing schedule I used wasn't enough heat?
Top
Post Reply

Return to “Techniques and Tools”