Looking for rubber mask
Moderators: Brad Walker, Tony Smith
Looking for rubber mask
Does anyone know of a rubber mask that you can put over glass and maybe stretch tight? I know there is 3M buttercut but, I have never used it. I saw a film of a glass blower that would blow a piece of glass and then stretch this rubbery material over the glass and then cut out a sandblast pattern. He would then spray the glass with a conductive spray and electroform it. I am not looking to do that but, I am looking for some type of plyable material that you can strectch over glass like he was using. Any ideas? Thanks.
-
Ron Coleman
- Posts: 468
- Joined: Sun Mar 09, 2003 3:20 pm
- Location: Columbus, Ohio USA
I remember the glass blower, Christopher Tarpley, and his technique.
http://www.hgtv.com/hgtv/cr_artists/art ... 53,00.html
http://www.kivaindianart.com/
Click on glass. Sombody else we know there too.
I think he was using the blasting resist made by Hartco. Very nice pliable green stuff as I remember.
http://www.hartcoservice.com/indexsandmask.html
Ron
http://www.hgtv.com/hgtv/cr_artists/art ... 53,00.html
http://www.kivaindianart.com/
Click on glass. Sombody else we know there too.
I think he was using the blasting resist made by Hartco. Very nice pliable green stuff as I remember.
http://www.hartcoservice.com/indexsandmask.html
Ron
Your alright
Thanks Ron! Your always full of great info and help. I wish I was as organized as you.
Paul
Paul
-
Tony Smith
- Posts: 1037
- Joined: Sun Mar 09, 2003 5:59 pm
- Location: Massachusetts, USA
- Contact:
The green Hartco #425 is 25 mil vinyl and isn't that rubbery, but it can be had at http://www.signwarehouse.com.
I like to use the Anchor Continental 128 which is an 18 mil rubber resist which is very pliable and conforms to almost any surface regardless of curvature. It is available from many glass distributors or from Dawson-MacDonald at http://www.dawson-macdonald.com/product.html. They don't have an online catalog, but give them a call and they'll ship.
Tony
I like to use the Anchor Continental 128 which is an 18 mil rubber resist which is very pliable and conforms to almost any surface regardless of curvature. It is available from many glass distributors or from Dawson-MacDonald at http://www.dawson-macdonald.com/product.html. They don't have an online catalog, but give them a call and they'll ship.
Tony
The tightrope between being strange and being creative is too narrow to walk without occasionally landing on both sides..." Scott Berkun
Just a couple of random ideas that I have not tried.
Rubber cement: Form fitting, can be as thick as you want, removable later.
Dipable rubber: The kind they sell for tool handles. Same thing here.
Both of these would require doing the designing/cutting on the piece, but you would avoid wrinkles bubbles etc.
Greg
Rubber cement: Form fitting, can be as thick as you want, removable later.
Dipable rubber: The kind they sell for tool handles. Same thing here.
Both of these would require doing the designing/cutting on the piece, but you would avoid wrinkles bubbles etc.
Greg
Paul,
We don't have the green resist but have various thicknesses of sandblasting resists at the Merry Go Round. Or you might call Craig and see if there is a local source for what you need.
FLYING GLASS - a hot glass shop in Granbury is located at: 315A Kings Plaza Craig Hedgecock: 817-579-7122
Vernelle
We don't have the green resist but have various thicknesses of sandblasting resists at the Merry Go Round. Or you might call Craig and see if there is a local source for what you need.
FLYING GLASS - a hot glass shop in Granbury is located at: 315A Kings Plaza Craig Hedgecock: 817-579-7122
Vernelle