husqvarna vs mk?

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Redfisher
Posts: 20
Joined: Sat Feb 26, 2005 12:03 pm
Location: St Augustine, FL

husqvarna vs mk?

Post by Redfisher »

I need to purchase a better 10" diamond blade. I looked for the answer with no luck.
Which is better?? Is there another brand that's better?? What do you use?
Thanks in advance!!
Terri
<'{{{{><
Top
Marty
Posts: 860
Joined: Mon Mar 10, 2003 3:58 pm
Location: Maine
Contact:
Contact Marty

Re: husqvarna vs mk?

Post by Marty »

what are you cutting?
Top
Valerie Adams
Posts: 587
Joined: Mon Apr 19, 2004 2:49 pm
Location: Santa Rosa, California
Contact:
Contact Valerie Adams

Re: husqvarna vs mk?

Post by Valerie Adams »

Talk to the folks at His Glassworks, linked above in the board sponsors.
Top
Redfisher
Posts: 20
Joined: Sat Feb 26, 2005 12:03 pm
Location: St Augustine, FL

Re: husqvarna vs mk?

Post by Redfisher »

Marty...mostly cutting tops off of dropped pieces and pattern bars.
Thanks Valerie!
Terri
<'{{{{><
Top
Marty
Posts: 860
Joined: Mon Mar 10, 2003 3:58 pm
Location: Maine
Contact:
Contact Marty

Re: husqvarna vs mk?

Post by Marty »

I really really like HIS's Result blade- get the thicker (.040) one and be nice to it (no constant dressing!).
Top
Redfisher
Posts: 20
Joined: Sat Feb 26, 2005 12:03 pm
Location: St Augustine, FL

Re: husqvarna vs mk?

Post by Redfisher »

I'll check out Hus! Thanks Marty!
Terri
<'{{{{><
Top
Post Reply

Return to “Techniques and Tools”