Firing advice
Posted: Mon Jan 27, 2014 2:23 am
Hello
I'm not sure about How to fire the next work, so i would love to have your help in understanding the process.
I want to creat a leaf from frit ( Bullseye , size 0), that I will get the detail in both side.
I made to part mold from plaster and silca.
I packed frit on the mold about 9 mm . And cover it whit the mold.and put weight on it.
I made two kind of mold, one is almost flat and the other one is about 4 cm deep.
Now I'm not sue about how high temp it need to get the detail from both side.
Do I need to refer it like pate de verre ( about 710c) or casting ( 830 c)?
Have a good day
Osnat
I'm not sure about How to fire the next work, so i would love to have your help in understanding the process.
I want to creat a leaf from frit ( Bullseye , size 0), that I will get the detail in both side.
I made to part mold from plaster and silca.
I packed frit on the mold about 9 mm . And cover it whit the mold.and put weight on it.
I made two kind of mold, one is almost flat and the other one is about 4 cm deep.
Now I'm not sue about how high temp it need to get the detail from both side.
Do I need to refer it like pate de verre ( about 710c) or casting ( 830 c)?
Have a good day
Osnat