i have an asw 18" lap grinder that is now leaking like a sieve at the inner elbow joint. i have emailed the company many times with no response.
since the grinder was pricey i am eager to have it fixed but have no idea who to take it to or if I can fix it myself.
any suggestions, please?
many thanks,
cheryl
lap grinder repair
Moderators: Brad Walker, Tony Smith
-
- Posts: 9
- Joined: Fri Jul 18, 2003 1:55 pm
- Location: chuluota, florida
- Contact:
-
- Posts: 52
- Joined: Mon Mar 10, 2003 12:22 pm
- Location: south tx
Re: lap grinder repair
Cheryl,
If I were you I'd call the folks at HIS glassworks. In my experience, they're willing to answer questions and help, and I don't think I've heard a bad word about them. And when one is clueless ( me ), they "brought enlightenment".
Linn
If I were you I'd call the folks at HIS glassworks. In my experience, they're willing to answer questions and help, and I don't think I've heard a bad word about them. And when one is clueless ( me ), they "brought enlightenment".
Linn
linn in deep deep south texas
-
- Posts: 9
- Joined: Fri Jul 18, 2003 1:55 pm
- Location: chuluota, florida
- Contact:
-
- Posts: 773
- Joined: Mon Mar 10, 2003 11:36 am
- Location: Tofino, British Columbia, Canada
Re: lap grinder repair
Steve at ASW was notoriously bad at communicating when I dealt with him. Great machine.
What you probably need is a new 'Belgium water feed, not just a little angle thingy which you can get at your local plumbing store.
Ask him about replacement of the parts via a telephone call.
ASW Diamond Products
PO Box 116
Gorman, CA 93243
(661) 724-8881
(800) 825-2792 Toll Free
(661) 724-8882 Fax
Call or Email us for an appointment today!
Another source but pricy:
http://www.diamond-drill-bit-and-tool.c ... ivel.shtml
Another source but probably not the right size I found a water swivel for only about $40.
Here's an issue for you to think about. I once asked via email about replacement and never got a reply.
Phone!!!!
What you probably need is a new 'Belgium water feed, not just a little angle thingy which you can get at your local plumbing store.
Ask him about replacement of the parts via a telephone call.
ASW Diamond Products
PO Box 116
Gorman, CA 93243
(661) 724-8881
(800) 825-2792 Toll Free
(661) 724-8882 Fax
Call or Email us for an appointment today!
Another source but pricy:
http://www.diamond-drill-bit-and-tool.c ... ivel.shtml
Another source but probably not the right size I found a water swivel for only about $40.
Here's an issue for you to think about. I once asked via email about replacement and never got a reply.
Phone!!!!
Re: lap grinder repair
Most lap grinders just have the water supply fed to the top, instead of through the center. You could add a simple water line & valve to top feed the water, at least as a temp fix.