|
SAMPLE FIRING LOG
The following is a blank log that may be copied or adapted for your own
use.
|
Date and Time:
____________________________________
Type of Firing:
____________________________________
Type of
Glass: ____________________________________ |
|
Starting
Temperature |
Ending
Temperature |
Rate
in
Degrees/Hour |
Minutes
Soaked |
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
|
Comments: _______________________________________ |
For each stage of the firing, indicate the starting and ending
temperature. In the "Rate in Degrees/Hour" column, note the rate
of temperature change over the range of temperature indicated. If the
piece is soaked at the ending temperature, indicate how long it is soaked.
First Project Fusing Log
The log for the fusing portion of the First Project is filled out below.
Date and
Time: 1/25/07 at 11:10 am
Type of
Firing: Two layer coaster fuse firing
Type of
Glass: Uroboros 90 and Bullseye tested compatible opals |
|
Starting
Temperature |
Ending
Temperature |
Rate
in
Degrees/Hour |
Minutes
Soaked |
| 70 |
1000 |
400 |
0 |
| 1000 |
1300 |
250 |
0 |
| 1300 |
1500 |
Full |
10 |
| 1500 |
1050 |
Full |
0 |
| 1050 |
750 |
200 |
0 |
| 750 |
70 |
Full |
0 |
| Comments:
Successful firing. Slight kiln wash sticking to bottom. |
Temperatures in the above chart are in degrees Fahrenheit.
"Full" indicates that the temperature increased or decreased as
rapidly as the kiln would allow.
Use your browser's back button to return to the previous page.
|
