WarmGlass.com

Hello Jim,

I have attached pics of 2 angles of the mold.

Hi Lori,

Yes, I think I can do a lower temp. This one, I believe went to 1250. I don't have my notes with me right now, so it's off the top of my head.

Hi everyone! I did this marvelous little dish for a friend, and I'd like to replicate it... without the saggy sides. The mold is pretty steep. What recommendations can you make to reduce this problem. Should I cut the glass any differently, or is it all in the firing schedule? And can you suggest a ...

On that shape you should be able to do it at 630ºC maximum, Possible 610ºC with 30min soak. You are doing it at 685ºC Lower temperature usually leads to less marking on the bottom of the mould. Hi Stephen, This is similar to what was suggested to me. I may sandblast them both and have another go at...

Thank you Roseanna,
I ran this by Valerie Adams also, and she agreed that it looks like texture from the mold. She suggested a different schedule for me to try, and I am going to give it a go.
Thanks for looking and replying!

Lisa

Hi everyone... I have looked at all the related posts about haze and devit, as well as on other searches, and I am unsure if my problem is devit. I have attached pictures of what is happening. I have 2 different pieces that were tack-fused Tekta-side down, all Bullseye glass. Then both pieces were d...