WarmGlass.com

We have used he Pyrex rod extensively in a project, we used our Diamond internaltional DL5000 just to make a little dent in the glass and then snap by hand. It works like a charm pretty well even at 45% angle.

We found that our Taurus saw was making too much of a large dent in it.


Dan

I have used A-14 from thomson with Mica and Silkcreen. It works very well but have to apply between 15 to 18 coat with drying time in between. Klyr fire is too liquid , not enough viscosity. I tried to go down to 9 coat and my gold mica did sink in my dark background. I used a 230 mesh sysntehtic fi...

If you are working with reusches, my best results were at 1250.

Dan

I am looking for some blank decal paper that we could silkscreen print on and then re sell to local glass shop.

Any idea of a suppliers

Thanks

Dan
L&D Design

Hi Guys,

Dan Des Rosiers here from Montreal. If I can be of any help just send me the request and I will gladly help.

A Bientot


Daniel Des Rosiers

40 dollars Canadian including tax at Refrabec 1-450-449-5390

Mr Jutras is the contact. This is on the south shore of Montreal. Check the shipping cost but that comes to about 30.00 dollars US not 50.00.

Where are you located?


Good Luck


Dan
L&D Design

You see Charlie, I am old enough that computer did not exist when white liquid paper was invented.

If you want to use it on your computer screen, go right ahead but beware your hair might also start tuning white


Dan

The questions came to me more than once. I guess their is another commecial name. White Liquid paper is the stuff that you can find at stationary store to erase a mistake made by typing. You apply this over your mistake and than re type on top and cannot see that you mess up.They use to sell them in...

I am not sure what you mean by once peel the stencil the mica rolls off. I just finished testing some Gold Mica sprayed on float with very small delicate details to test if I could keep my clean hedge. and if I would mess up my design when I use very small details being sprayed with the Air brush I ...

Not tested,

I gues we should try

Dan

Yes, We have tried White liquid paper between 2 pieces of glass. Fully fused the brightness and clarity are intact. We actually use it to simulate a snow storm If you are looking for adding some bright clear looking white to your fused piece, you have to try it to believe it. What is in Liquid paper...

Perfect. I will try to use yahoo since I am already familiar with some of the yahoo group. I guess the principle is the same for pictures Stay tune in the next few days. I will be out of town until Monday, So I should be able to show you some results sometimes next week We should actually call this ...

Here we go again, I made another test last night with some float. I now tried the Super Spray on one piece of copper and The unique glaze on the other. I wish I knew how to post picture on this forum that you can see the results. Short story is that the glaze still did not work but the super spray h...

Okay, I least I got this part right. I bought the good glaze. I will try different thickness and away from the edge. However in the mean time I got an e-mail back from Tom from Texas that originally made the posting I was looking for. The most interesting part of all is that he recommend that I actu...

Unfortunetely I cannot acces your pictures from this station. I will try later tonight at the studio. But to answer your question, This is the .25 micron from BE. Why? Do you think that it is too thin and I burn it right off.? I have a feeling that I dont have the right glaze. Or do you have any sug...

A while back I saw a tread about using the unique overglaze to keep the color of copper in a sandwich fusing.

I have ordered the GC950 A and cannot make it work. Do I have the right one or is their a special way to apply it to have my copper looking piece


Dan

Made a test over the weekend with the fusemaster white. I use water and gum arabic. I did not cure before I sandwich the clear on top of of my base.Microscopic bubble but my paint looks like hell. It seems that all the water in the paint starts running and also faded away. I probably should have cur...

I have used a water base with the reuches paint, I then sandwich between 2 layers at 1525 and the result was that my opaque paint faded way.The Reuches paint that I used was a 1250 recommended. However they also have a higher temperature paint for slumping. That might be better. If you use a oil bas...

http://www.sandcarver.org has an extensive menu on the subject. Lots of expertise on what works the best.


Dan

My kids are now 15 and 13 yeard old respectively.They both cut, assemble, fuse and paint on glass with the proper precaution. As a matter of fact my wife and I started both kids at arounf 4 years old as well doing tiles for our bathroom that they could see their work on a daily basis. HOWEVER, we bo...