Search found 2313 matches
- Mon May 24, 2021 10:28 am
- Forum: Techniques and Tools
- Topic: Graham Stone
- Replies: 4
- Views: 16574
Re: Graham Stone
Way back in the day, I posted a question, about fusing 3 layers of 12mm float, and getting grapefruit sized bubbles, in the corner. Within a few minutes, Graham posted a good answer, which was don’t heat hot enough to get to bubble blowing viscosity (1450ºF). As far as I am aware, that was the last ...
- Mon Jan 11, 2021 12:12 am
- Forum: Techniques and Tools
- Topic: annealling large panels
- Replies: 2
- Views: 12808
Re: annealling large panels
I'm. making a 30 inch x 40 inch 9mm thick panel what should the anneal time be? I thought about 12 hours would that be enough I anneal 10mm float with a 1.2 hour soak at 1000, 1.2 hours down to 900, .8 hours down to 700, .8 hours down to 300. For fusing glasses, I drop those temps down 80ºF. A twel...
- Sun Jan 05, 2020 4:49 pm
- Forum: Techniques and Tools
- Topic: Fiber Kiln/Shelf
- Replies: 11
- Views: 26624
Re: Fiber Kiln/Shelf
I have a new all-fiber kiln including the shelf. I have heard so much 'noise' about whether or not you can fire directly on the kiln washed fiber shelf OR you should use thin fire, I'm don't know how to proceed. Would really appreciate some advice. Thanks! I agree that kilnwash is problematic. Perh...
- Sun Jan 05, 2020 4:46 pm
- Forum: Techniques and Tools
- Topic: Adhesive Question
- Replies: 7
- Views: 17534
Re: Adhesive Question
Try Hang Your Glass. Used properly it should provide a bond stronger than the glass.
Or trying heating the Hyxtal a bit to make it set up quicker.
Or trying heating the Hyxtal a bit to make it set up quicker.
- Thu Sep 05, 2019 8:22 pm
- Forum: Newcomer Forum
- Topic: ridigizer with fiberboard
- Replies: 4
- Views: 13997
Re: ridigizer with fiberboard
There are 2 kinds of rigidizer, colloidal silica and colloidal alumina. Silica tends to land on the surface and sticks to glass (often the pink stuff). Alumina is probably what the boards are made with in the first place (green stuff as I’ve seen it). I sinks in and doesn’t stick to glass as much. B...
- Mon Jul 08, 2019 3:45 pm
- Forum: Techniques and Tools
- Topic: SSR question
- Replies: 17
- Views: 36551
Re: SSR question
A simple rule is always give at least an 80% margin. So a 36 amp draw would need at least 45 amp relay. 50 amp relays are quite common and inexpensive. I recently got burned buying Chinese relays. They came with recommended light weight heatsinks. I had a fire, that luckily I could blow out with my ...
- Fri Apr 26, 2019 12:26 am
- Forum: Techniques and Tools
- Topic: SSR question
- Replies: 17
- Views: 36551
Re: SSR question
It is always a good idea to work within 80% of capacity only for wires, breakers, and relays. Putting 36 Amps through a 50 amp rated relay is probably how I’d go, but splitting them up is good too. In larger kilns, I always use 3 zones with 3 thermocouples, because the middle zone is always hotter t...
- Fri Apr 26, 2019 12:20 am
- Forum: Techniques and Tools
- Topic: kiln controller question
- Replies: 15
- Views: 28043
Re: kiln controller question
Thanks Bert, I think that I am going to wire a single female to the controller and switch out thermocouple lines when I need to. I am going to use a low voltage toggles to switch signal voltage lines but I would be worried about doing the same thing with the thermocouple lines where current accurac...
- Thu Apr 25, 2019 9:39 pm
- Forum: Techniques and Tools
- Topic: kiln controller question
- Replies: 15
- Views: 28043
Re: kiln controller question
I’ve done pretty long runs of thermocouple wire with no issues.
The idea of one outlet wired to the controller and plug either one in to run it is the simplest approach I know of. This can be hard wired with some sort of knife switch or something so you can divert the power to one side or the other.
The idea of one outlet wired to the controller and plug either one in to run it is the simplest approach I know of. This can be hard wired with some sort of knife switch or something so you can divert the power to one side or the other.
- Sun Mar 03, 2019 2:39 am
- Forum: Art, philosophy, and content
- Topic: Shout out to Doc Steve Immerman & Richard Parrish
- Replies: 0
- Views: 137862
Shout out to Doc Steve Immerman & Richard Parrish
I am visiting Chicago, and popped in to a craft gallery when I saw Doc Steve’s work in the window. Always a pleasure to see it in person. My surprise in the gallery was some new work by Richard Parrish. I’ll comment that I have seen many pictures, but in person his pieces really shimmer with nuanced...
- Sun Mar 03, 2019 2:25 am
- Forum: Techniques and Tools
- Topic: kiln elements
- Replies: 8
- Views: 18981
Re: kiln elements
Jolly, yes you can shorten elements to get them to glow hotter. They will draw more wattage and more amperage. I would consult with Duralite. They can make you new coils designed with an exact amperage and watts per cubic foot inside your kiln. Meanwhile, I would make sure you don’t have a relay stu...
- Tue Feb 19, 2019 1:30 pm
- Forum: Newcomer Forum
- Topic: I need castable mould materials to melt plate glass into a disc.
- Replies: 36
- Views: 75177
Re: I need castable mould materials to melt plate glass into a disc.
Aaron, your knowledge of glass is sorely lacking. You continually make wrong statements. Answering them all is book length. If you can purchase what you want for $75, I advise you to do so, unless you would rather spend $75,000 learning about glass. Tempered glass never breaks in 2 pieces. 2,000 is ...
- Thu Feb 14, 2019 12:15 pm
- Forum: Newcomer Forum
- Topic: I need castable mould materials to melt plate glass into a disc.
- Replies: 36
- Views: 75177
Re: I need castable mould materials to melt plate glass into a disc.
Schott likely has heavier tougher bricks that stay about the same temp in their flow through set up. As for the temperature their shelf/mould can handle, their shelf is molten tin. I can not copy them. While SCHOTT does make float glass, their optical casting glasses are not float. I believe HIS gl...
- Thu Feb 14, 2019 12:13 pm
- Forum: Newcomer Forum
- Topic: I need castable mould materials to melt plate glass into a disc.
- Replies: 36
- Views: 75177
Re: I need castable mould materials to melt plate glass into a disc.
I found the name for dental stone. Hydrocal. Melting temp is 2650 F, but upper working temp is 900 F. I wonder why it does not work higher. Remember that mold and glass must be compatible. That means that the glass would need a higher expansion coefficient so it will shrink more on cooling. Otherwi...
- Wed Feb 13, 2019 8:59 pm
- Forum: Newcomer Forum
- Topic: I need castable mould materials to melt plate glass into a disc.
- Replies: 36
- Views: 75177
Re: I need castable mould materials to melt plate glass into a disc.
I found the name for dental stone. Hydrocal. Melting temp is 2650 F, but upper working temp is 900 F. I wonder why it does not work higher. Plaster has 2 kinds of water in it, the water you mix it with and chemically bonded water. Both need to exit the mold. Solid Hydrocal, will just crack. So you ...
- Tue Feb 12, 2019 7:04 pm
- Forum: Newcomer Forum
- Topic: I need castable mould materials to melt plate glass into a disc.
- Replies: 36
- Views: 75177
Re: I need castable mould materials to melt plate glass into a disc.
WoW You are in for an extremely steep learning curve. First of all, float glass has a relatively high melting point. Second, refractory molds don’t fare well above 1400ºF. Third you will never get bubble free stacking glass. You would do best starting out with a piece of glass thicker than you want ...
- Thu Jan 24, 2019 10:10 am
- Forum: Techniques and Tools
- Topic: irritating news
- Replies: 11
- Views: 30157
Re: irritating news
Nice table Bert. It is underneath all the stuff they are selling. Barn board pattern shows well despite all the stuff sitting on top of it. https://homeplushome.com/ Odd Kevin. You describe the table. Your link is for my guy but at a different location. I don’t see the picture you reference. I’m so...
- Mon Jan 14, 2019 4:45 pm
- Forum: Techniques and Tools
- Topic: irritating news
- Replies: 11
- Views: 30157
Re: irritating news
Welcome back, friend. Glad you';re on the mend! I'm in week 5 after hip replacement and doing well too. I finished and shipped out two commissions the day before surgery, and during recovery dreamed up all kinds of new pieces. Do report on your new works. Nikki, after my surgery, I had a large impo...
- Sat Jan 12, 2019 12:44 pm
- Forum: Techniques and Tools
- Topic: irritating news
- Replies: 11
- Views: 30157
irritating news
I haven't been around for a while, but this news came across my screen this morning. This was the factory I visited decades ago, where I was taken to lunch with 5 industry experts who let me pick their brains. Years later, they told me that my advocacy for using colors designed for ceramics on glass...
- Tue Feb 06, 2018 11:19 am
- Forum: Techniques and Tools
- Topic: thicker and thinner together- ok?
- Replies: 13
- Views: 22999
Re: thicker and thinner together- ok?
Bonnie
I consider successful drilling to be a successful annealing test. If there are internal stresses, drilling will find them.
Bert
I consider successful drilling to be a successful annealing test. If there are internal stresses, drilling will find them.
Bert