Search found 190 matches

by Terry Gallentine
Sat Jan 27, 2024 4:55 pm
Forum: Techniques and Tools
Topic: glass colorants
Replies: 15
Views: 10389

Re: glass colorants

Thanks Barry. Previously when I was mixing stains with low fire frits, I was getting the frit or "flux" from Fusion Ceramics. At that time, I was more interested in the low temp fluxes but now I should look into the higher temp frits that Pimco or Ferro have. One of the reasons that I used...
by Terry Gallentine
Fri Jan 26, 2024 12:11 pm
Forum: Techniques and Tools
Topic: glass colorants
Replies: 15
Views: 10389

Re: glass colorants

I have been working over the years with techniques to permanently put imagery into glass. That involved screen printing either enamels or stains (mixed with low fire frit) onto glass. The problems that I had were that the enamels were too easily broken down by alkalis and acids, as were the mixes of...
by Terry Gallentine
Fri Jan 19, 2024 6:48 pm
Forum: Techniques and Tools
Topic: glass colorants
Replies: 15
Views: 10389

Re: glass colorants

Thanks Don. From what I have been encountering, I get the feeling that glass paints or China paints would vaporize too quickly but I will experiment using some glass paints that I have around.
by Terry Gallentine
Thu Jan 18, 2024 12:46 am
Forum: Techniques and Tools
Topic: glass colorants
Replies: 15
Views: 10389

Re: glass colorants

Thank you Daniel. The batch colorant page is especially interesting. I need to access some small test amounts of some of the metal oxides (or carbonates) and I will probably give sulfur a run. At least I will find out with sulfur how well my vented enclosure works.
by Terry Gallentine
Mon Jan 15, 2024 1:14 pm
Forum: Techniques and Tools
Topic: glass colorants
Replies: 15
Views: 10389

Re: glass colorants

I tried Mason Stains because I use them all of the time in screen printing but they didn't work with the laser. They were burned away by the laser and ineffective. I believe the metal oxides and carbonates work because they are actually coloring the glass at the immediate point of contact of the bas...
by Terry Gallentine
Mon Jan 15, 2024 12:11 pm
Forum: Techniques and Tools
Topic: glass colorants
Replies: 15
Views: 10389

glass colorants

I have been experimenting with using lasers to burn images into glass and it has been going well. Currently I am using glass colorants that can be lasered to tint the base glass. The colorant that I have been using is cobalt carbonate since it is probably one of the most potent glass colorants. I ha...
by Terry Gallentine
Mon Jan 15, 2024 11:05 am
Forum: Techniques and Tools
Topic: A consistent layer of powder frit?
Replies: 5
Views: 7703

Re: A consistent layer of powder frit?

I just thought that I would mention that the powder screening worked well to get the even layer that I needed. I did learn though that you need either a new screen or one that is perfectly clean for consistency. The first screen that I used had a little haze in it left over from wet media screening ...
by Terry Gallentine
Thu Jan 11, 2024 12:21 am
Forum: Techniques and Tools
Topic: A consistent layer of powder frit?
Replies: 5
Views: 7703

Re: A consistent layer of powder frit?

Yeah, I have tried hand sifting but even with larger sifters it isn't even enough. I will try the screen technique and hopefully it will do the job.
by Terry Gallentine
Wed Jan 10, 2024 6:54 pm
Forum: Techniques and Tools
Topic: A consistent layer of powder frit?
Replies: 5
Views: 7703

Re: A consistent layer of powder frit?

Thanks Brad. I just thought that I would see if anybody had any other possibilities.
by Terry Gallentine
Wed Jan 10, 2024 4:42 pm
Forum: Techniques and Tools
Topic: A consistent layer of powder frit?
Replies: 5
Views: 7703

A consistent layer of powder frit?

I need to overlay some imagery on glass with a layer of clear powder frit. I need to achieve a thin layer that is consistent in thickness across the entire piece and that is repeatable on other pieces. I am contemplating dry screening the powder with a 110 mesh screen but I thought that I would see ...
by Terry Gallentine
Sat Jul 22, 2023 6:38 pm
Forum: Techniques and Tools
Topic: Fiber Kiln/Shelf
Replies: 11
Views: 21962

Re: Fiber Kiln/Shelf

I was just wondering what type of kiln controller you have and whether it has a high temperature limit on it?
by Terry Gallentine
Thu Jul 20, 2023 8:28 pm
Forum: Techniques and Tools
Topic: Powder Frit
Replies: 4
Views: 6223

Re: Powder Frit

It was my first attempt at ball milling some Easy Melt cullet from Wissmach and I probably did pulverize it too much. I was used to using scrap that I had to quench and stamp to make a gravel before I milled it and that took quite a while to mill down. I will try less time in the mill. I will probab...
by Terry Gallentine
Thu Jul 20, 2023 5:18 pm
Forum: Techniques and Tools
Topic: Powder Frit
Replies: 4
Views: 6223

Re: Powder Frit

Thanks Brad. Do you have any ideas of how to get rid of the super fine particles?
by Terry Gallentine
Thu Jul 20, 2023 1:21 pm
Forum: Techniques and Tools
Topic: Powder Frit
Replies: 4
Views: 6223

Powder Frit

I am ball milling some glass down to use as a frit for fusing and I have a question. I have had a problem with milkiness in my clear powder and I assume that it is because I have not been screening out the extremely fine particles out of powder that I have run through an 80 mesh screen. Does anyone ...
by Terry Gallentine
Sat Apr 22, 2023 9:45 am
Forum: Techniques and Tools
Topic: Enamel & powder
Replies: 11
Views: 15615

Re: Enamel & powder

I have ventilation near the kilns but the amount of lead that is vaporized is minimal. I have had periodic lead blood tests mainly because of my leaded glass work and have had no high levels. The danger of lead poisoning is greater with simple solder work for leaded glass than the firing of lead bas...
by Terry Gallentine
Sat Apr 22, 2023 1:27 am
Forum: Techniques and Tools
Topic: Enamel & powder
Replies: 11
Views: 15615

Re: Enamel & powder

Those are Fahrenheit degrees. I use a pretty low firing lead based flux for my work and that is why the temps with stains added are around 1250 to 1350 degrees.
by Terry Gallentine
Fri Apr 21, 2023 9:23 am
Forum: Techniques and Tools
Topic: Enamel & powder
Replies: 11
Views: 15615

Re: Enamel & powder

The fluxes that I use have a melting point of around 1000 degrees. The addition of the ceramic stains raises the melting point of the mixture. The mixture's maturing point depends upon how much stain is added to the flux. I find that I get results at temperatures from 1250 degrees to 1350 degrees.
by Terry Gallentine
Mon Sep 26, 2022 11:43 pm
Forum: Techniques and Tools
Topic: Fusing 5mm clear sheets
Replies: 2
Views: 5211

Re: Fusing 5mm clear sheets

Peter--Did you go ahead and experiment with fusing multiple layers of 5mm clear together? If you did, did you use the Oceanside 96 or did you use the Wissmach 96? I am thinking about trying out the Wissmach 96 and might be interested in putting together an order with someone else for some full sheet...
by Terry Gallentine
Fri Aug 26, 2022 10:41 am
Forum: Techniques and Tools
Topic: Kiln Conversion
Replies: 1
Views: 2825

Kiln Conversion

I am considering purchasing a three phase kiln but I would have to convert it to single phase for my shop. Does anyone out there have any experience doing this and what is involved in the process?
by Terry Gallentine
Wed Aug 17, 2022 12:37 pm
Forum: Techniques and Tools
Topic: Kiln wash application
Replies: 10
Views: 8201

Re: Kiln wash application

Thanks for the suggestion, I might use it in the future. As it is, I am just using the kiln (a bell kiln) lowered to just above the mold to warm the mold. I then roll out the trolley floor with the mold and apply the kiln wash.